Cart 2 india

Specification
Brand : Eldon James
BulletPoint1 : RoHS Compliant
BulletPoint2 : USP Class VI
BulletPoint3 : HDPE has various applications for use in medical products and devices
BulletPoint4 : HDPE complies with FDA 21 CFR 177.1520
BulletPoint5 : Every product has quality inspection before leaving the factory.Customer satisfaction is our tireless pursuit.We will show you a sincere attitude and satisfactory solution.
Color : One Color
ConnectorType : Barb
ExteriorFinish : Plastic
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier : 8243126899291
ExternallyAssignedProductIdentifier1 : 647349377679
ExternallyAssignedProductIdentifier2 : 0647349377679
IncludedComponents : Mini 1/4" Male 1/4 Inch Female NPT Brass Ball Shut Off Valve Water Air Fluid
ItemDisplayWeight : 1.44 ounces
ItemName : Eldon James Y0-4HDPE High Density Polyethylene Equal Barbed Y-Connector, 1/4" Hose Barb (Pack of 10)
ItemPackageDimensions_Height : 1.27 centimeters
ItemPackageDimensions_Length : 10.16 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemShape : Inline
ItemTypeKeyword : y-tube-fittings
Manufacturer : Eldon James
Material : High Density Polyethylene
MaximumOperatingPressure : 150 pounds_per_square_inch
ModelName : AELATNGS
ModelNumber : Y0-4HDPE
NationalStockNumber : 4820-01-397-8587
NumberOfBoxes : 1
NumberOfItems : 10
NumberOfPieces : 10
NumberOfPorts : 1
PartNumber : Y0-4HDPE
ProductDescription : This Control Devices SV-150 ASME safety valve has a brass body, a 150 psi relief pressure, a 1/4" male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure. This safety valve is American Society of Mechanical Engineers (ASME) safety rated and displays the UV mark for pressure vessel safety valves. It also displays the NB mark for certification in accordance with NB-501, National Board Certification of Pressure Relief Devices. This safety valve has a 58 Standard Cubic Feet per Minute (SCFM) flow rate and is suitable for low capacity pressure relief applications such as in home construction air compressors. Relief valves remove excess pressure or vacuum from a system. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.
ProductSiteLaunchDate : 2015-11-11T08:00:01.000Z
Size : SV-150
SpecificationMet : ASME B16.34
SpecificationMet1 : Mss Sp-110
SpecificationMet2 : Ww-v-35c
Style : Threaded
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 40141700
ValveType : Pressure Relief Valve