Cart 2 india

Specification
Brand : Kegco
BulletPoint1 : Rapidly chill your wort in as fast as 20 minutes when whirlpooling, chill your wort in as little as 20 minutes
BulletPoint2 : Constructed from 50' of 1/2" stainless steel tubing and wound into a tight stack of 12" diameter coils
BulletPoint3 : Features two garden hose thread (GHT) fitting that attaches to standard garden hose connections and utility sinks
BulletPoint4 : Chiller size is approximately 24-1/5" high and 12" in diameter
BulletPoint5 : Kegco Stainless Steel Immersion Chiller is ideal for brewing large batches of beer
BulletPoint6 : 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew 30 plates wort chiller is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!
CareInstructions : Hand Wash
Color : Stainless Steel
ExternallyAssignedProductIdentifier1 : 810033768477
ExternallyAssignedProductIdentifier2 : 0810033768477
GpsrSafetyAttestation : 1
IncludedComponents1 : 1* Wort Chiller
IncludedComponents2 : 4* Hose Clamps
ItemName : Kegco 3PFL-SEC.5-50 Immersion Chiller, 50', Stainless Steel
ItemPackageDimensions_Height : 77.978 centimeters
ItemPackageDimensions_Length : 30.734 centimeters
ItemPackageDimensions_Width : 30.988 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : beer-brewing-wort-chillers
Manufacturer : Kegco
Material : Stainless Steel
ModelName : 3PFL-SEC.5-50
ModelNumber : 3PFL-SEC.5-50
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 3PFL-SEC.5-50
ProductDescription : MRbrew BRAND HIGH-QUALITY 30-PLATE WORT CHILLER BRINGS HOMEBREWING SURPRISE TO YOU!

The fastest and the most efficient tool to chill your wort to yeast pitching temperature
There is no need to recirculate the wort back into the kettle because it is already cooled to the temp you need when out of the chiller
The wort chilling rate is depending on tap water temperature and rate of flow, colder of water, more slowly of wort flow, chilling is faster

ABOUT SPECIFICATIONS
Four ports barb: 1/2’’ Barb
Dimensions: 7.5" L x 2.9" W x 2.9" H

OPERATION TIPS
1. Soak the wort side in a suitable cleaning solution
2. Rinse with water, after filling it with cleaning solution, tip it from side to side to make sure air bubbles escape
3. Let dry after it has been flushed
4. Connect wort-in port to the mash tun
5. Connect wort-out port to your fermenter
6. Connect water-in port to garden hose getting cool water
7. Connect water-out port to garden hose to remove warm water
8. Turn on the cooling water first and then open the valve on your pot to start the wort flow
9. Flush the wort side of the chiller with plenty of clean water immediately after use
10. To remove deposits, soak in a suitable cleaner for 4 hours and then flush

TEST THE WATER SIDE
Check leaks by running your garden hose briefly before cooling wort
Use a KettleScreen on the inside of your pot to prevent large particles in the wort from clogging your chiller

AVOID FREEZING & CHLORINE BLEACH
If the chiller is allowed to freeze with liquid inside it, it could damage the plates
Dilute chlorine bleach will rust the chiller if left in contact for more than 4 hours

NOTE:
Please careful on the first use, the bottom of the chiller is a little sharp!!!

YOU WILL SURPRISINGLY GET
1* 30-Plate wort chiller
ProductSiteLaunchDate : 2020-08-19T00:00:00.000-07:00
Size : 50'
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52141500