Cart 2 india

Specification
Brand : Mwsk
BulletPoint1 : Along this same line, the surface-area of the coolant flow-path is larger than the OEM pieces which further optimizes coolant improving cooling-performance.
BulletPoint2 : Build to factory original-quality OE-specifications to a proper fit.Simply remove the end of the hose from the plastic-fitting, then remove the fitting from the-head, then install the replacement fitting into the-head and slide the hose and hose clamp onto the fitting.
BulletPoint3 : This hose runs from the coolant thermostat housing to the front of the-head. The plastic-fitting on this hose is a known weak in the coolant as it commonly cracks and leaks. The-ideal solution to the problem is to replace the fitting with that will never wear-out, or leak. This fitting is a direct replacement for the stock plastic-fitting with no modification to any part of the necessary.
BulletPoint4 : This product is made from high strength aerospace aluminum. Also, this product was-designed to maximize to breakage, so that it will not as the OEM-fitting does. In addition to this, the coolant flow-path through the center of the fitting is optimized to maximize coolant
BulletPoint5 : aluminum, which is and There are no-sharp corners on this fitting, so the coolant will not be damaged when it passes through. Make sure you use it for a long-time.
Color : Silver
ExternallyAssignedProductIdentifier : 7682270082639
IsExpirationDatedProduct : 1
ItemName : Mwsk Aluminum 6061 Water Hose Fitting Replaces 11537544638 11537541992 Replacement for N53 N54 335i 335xi 3.0L
ItemPackageDimensions_Height : 1.5 inches
ItemPackageDimensions_Length : 1.5 inches
ItemPackageDimensions_Width : 0.7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : worm-gear-hose-clamps
Manufacturer : Mwsk
Material : Stainless Steel
NumberOfItems : 10
PartNumber : Mwsk
ProductDescription : Aluminum 6061 Water Hose Fitting Replaces 11537544638 11537541992 Replacement For N53 N54 335i 335xi 3.0L

Features:
This product is made from high strength aerospace aluminum. Also, this product was-designed to maximize to breakage, so that it will not as the OEM-fitting does. In addition to this, the coolant flow-path through the center of the fitting is optimized to maximize coolant
Along this same line, the surface-area of the coolant flow-path is larger than the OEM pieces which further optimizes coolant improving cooling-performance.
This hose runs from the coolant thermostat housing to the front of the-head. The plastic-fitting on this hose is a known weak in the coolant as it commonly cracks and leaks. The-ideal solution to the problem is to replace the fitting with that will never wear-out, or leak. This fitting is a direct replacement for the stock plastic-fitting with no modification to any part of the necessary
aluminum, which is and There are no-sharp corners on this fitting, so the coolant will not be damaged when it passes through. Make sure you use it for a long-time.
Build to factory original-quality OE-specifications to a proper fit.Simply remove the end of the hose from the plastic-fitting, then remove the fitting from the-head, then install the replacement fitting into the-head and slide the hose and hose clamp onto the fitting.

Specifications:
Aluminum Alloy
Length:Approx.4.3cm/1.69inch
Color:Silver/Red/Black/Blue
For N54 335i 11537541992 11537544638

Package Includes:
1x Water Hose Fitting

Note:
1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
ProductExpirationType : Shelf Life
ProductSiteLaunchDate : 2024-11-13T06:30:59.250Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000