Cart 2 india

Specification
Brand : Hillman
BulletPoint : KEYKRAFTER #2050 BRASS
BulletPoint1 : 1. Multi-layer coating: It can directly perform high-speed roughing to fine processing for heat-treated materials below 58°, reducing the number of tool changes and improving machine tool processing efficiency.
BulletPoint2 : 2. The new fine-grained tungsten steel base material has high wear resistance and strength, and is specially designed for high-hardness and high-speed cutting applications.
BulletPoint3 : 3. 4mm shank . Can fit on most CNC machine, Engraving machine, High speed machine.
BulletPoint4 : Under the condition of ensuring the chip space, the large core diameter design is adopted to enhance the rigidity of the tool, and the rigidity of the tool and the strict chip discharge performance and the scientific groove control are made, so that the cutting and chip removal of the tool are more stable.
BulletPoint5 : 5.For 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
Color : No Color
Department : unisex-adult
ExternallyAssignedProductIdentifier : 8769358042026
ExternallyAssignedProductIdentifier1 : 038902159922
ExternallyAssignedProductIdentifier2 : 0038902159922
ImportDesignation : Made in the USA
IncludedComponents : KEYKRAFTER #2050 BRASS
ItemName : Hillman KEYKRAFTER #2050 Brass
ItemPackageDimensions_Height : 4.953 centimeters
ItemPackageDimensions_Length : 9.652 centimeters
ItemPackageDimensions_Width : 5.334 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : woodruff-keyseat-cutters
Manufacturer : Hillman Group Rsc
Material : Plastic
ModelName : KEYKRAFTER #2050 BRASS
ModelNumber : SEPUS_8KF65VG8
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 532050
ProductDescription : Specification:
Type: 2 Flute Flat End Mill
Material: Tungsten Carbide
Coating: Blue Coated
Shank: 4mm
Cutting Dia: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.7mm 0.8mm 0.9mm
Overall Length: 50mm
User Tips
In order to obtain a better cutting surface and extend the life of the tool, be sure to use a tool holder with high precision, high rigidity and good dynamic balance.
1. Before using this tool, please measure the tool yaw and the tool yaw accuracy exceeds 0.01MM, please correct it before cutting.
2. The shorter the length of the tool extension clamp, the better, if the extension of the tool is extended, please reduce the rotation speed, feed speed or cutting amount.
3. If abnormal vibration or sound is generated during cutting, reduce the spindle speed and cutting amount until the condition is improved.
4. Steel cooling is best applied by spray or jet to maximize the effect of high aluminum . Insoluble water-soluble cutting fluids are recommended for stainless steel, alloys or heat resistant alloys.
5. The cutting method depends on the influence of workpiece, machine and software. The above data is for reference only. After the cutting condition is stable, the feed rate will be increased 30% to 50%.

Package Including:
1 Set 2 Flutes Flat End Mill
ProductSiteLaunchDate : 2020-09-21T12:59:12.140Z
Size : One Size
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4
UnspscCode : 46182300
WarrantyDescription : Warranty