Cart 2 india

Specification
Brand : Bosch Accessories
BulletPoint1 : 5 tungsten carbide drill bits
BulletPoint2 : Diameters 4/5/6/7/8 mm
BulletPoint3 : Plastic display box
BulletPoint4 : 2607019445
BulletPoint5 : [INCLUDED ] 3pcs 5/16 3/8 1/2 Inch square drill bit.
Color : Blue
CustomerPackageType : Standard Packaging
CuttingAngleString : 135 degrees
ExternallyAssignedProductIdentifier1 : 3165140415637
ExternallyAssignedProductIdentifier2 : 03165140415637
ExternallyAssignedProductIdentifier3 : 3165140067065
ExternallyAssignedProductIdentifier4 : 03165140067065
FinishType : Tungsten Carbide
GpsrSafetyAttestation : 1
Hazmat : No
ItemName : Bosch 5 pcs. Concrete Drill Bit Set (for Concrete, Ø 4-8 mm, Accessory Drill Driver)
ItemPackageDimensions_Height : 1.2 centimeters
ItemPackageDimensions_Length : 15.6 centimeters
ItemPackageDimensions_Width : 5.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wood-drill-bit-sets
Manufacturer : Bosch
Material : Carbide
ModelNumber : 2607019445
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 2607019445
ProductDescription :
Generally, square hole drills need to be used with square hole drilling machines (square tenoning machines).
Using square hole drill bit (installed on a square tenon machine) to make a square hole is faster than using a chisel or other manual methods, and the size of the square hole is more accurate.
Material: HSS
Size: inch
Type D(Hole diameter) D1(Handle diameter) D2(Clamping diameter) B(Grooving depth) L(Total length)
5/16 5/16 approx 1/4 3/4 approx 2 approx 8-1/2
3/8 3/8 approx 5/16 3/4 approx 2 approx 8-9/16
1/2 1/2 approx 3/8 3/4 approx 2-3/4 approx 8-1/4
Note: The size of the clamping drill sleeve of the square tenoning machine needs to be greater than 19mm (3/4 inch)
Use note:
1.In normal use, don't try to shape it at one time, but need to press and lift multiple times. This will not only help the drill bit to discharge the sawdust, drill a suitable square hole, but also protect the drill bit.
2.When using continuously for a long time, pay attention to cooling the drill bit.
3.It should be specially pointed out that: We strongly do not recommend using hand drills or ordinary drill stands (non-square tenoning machines) to match this drill bit to make square holes.
ProductSiteLaunchDate : 2012-08-07T22:16:04.407Z
Size : Ø 4.00 mm
StreetDate : 2008-11-13T00:00:01Z
Style : 5 pcs.
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Plastic
UnitCount : 5
UnspscCode : 27111700