Specification Brand : Foredom BulletPoint1 : FOREDOM SPEED CONTROL & CHISEL HANDPIECE FOR TX & LX PERMANENT MOTORS BulletPoint2 : TABLE TOP VARIABLE SPEED CONTROL EMX-1 & 50C CHISEL HANDPIECE WITH 11 CHISELS BulletPoint3 : Kit K.EMX-50 is for use with Series TX, LX and other 'permanent magnet' motors with a standard key tip shaft. BulletPoint4 : Kit includes C.EMX-1 Dial Speed Control, along with H.50 Chisel Handpiece and the following 11 Chisels: A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, A-KC510, A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511. ExternallyAssignedProductIdentifier1 : 028841195839 ExternallyAssignedProductIdentifier2 : 0028841195839 ItemName : Dial Control Kit for 115V TX or LX, EMX-1, 50 hp, 11 Chisels A-KC501, A-KC502, A-KC503, A-KC504, A-KC505, A-KC506, A-KC507, A-KC508, A-KC509, A-KC510, A-KC511 ItemPackageDimensions_Height : 26.8 centimeters ItemPackageDimensions_Length : 17.3 centimeters ItemPackageDimensions_Width : 18.8 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : wood-chisels Manufacturer : Foredom ModelNumber : K.EMX-50 PartNumber : 0620-35150 ProductDescription : Kit includes C.EMX-1 Dial Speed Control, H.50 Chisel Handpiece and the following 11 Chisels: A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, A-KC510, A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 shown in photo. Foredoms Chisel Handpiece gives a power assist to carving in all types of wood, plastic, plaster and soft carving stone. The H.50 is a reciprocating hammer type handpiece that requires a light pressure to engage the hammering chisel action. It attaches to a Foredom or other flex shaft with a standard key tip shaft. Shaped like the popular H.44T, it has a unique, rugged textured plastic barrel and tapered aluminum tip. The Chisel Handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors in forward rotation only. For optimum performance use between 1,000 8,000 rpm. We recommend the use of a bench top dial speed control, in place of the more common foot pedal, to run steady within the recommended speed range. Carvers can set and maintain any desired speed when connected to a dial control. Kit K.EM-50 is for use with Series SR, S, CC, and other ‘universal motors’. Kit K.EMX-50 is for Series TX, LX and other ‘permanent magnet’ motors. ProductSiteLaunchDate : 2017-11-07T08:00:00.000Z Style : Pencil SupplierDeclaredDgHzRegulation : not_applicable TargetAudienceKeyword : Foredom Set Voltage : 115 volts