Arno 467856 Solid Steel French Timber Framing Slick Chisel 40 mm (1-9/16 Inch) Wide x 14 Inches Long RC 58-60 PVC Dipped Handles

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 13100/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : ARNO
BulletPoint1 : Slick is 40 mm wide (1-9/16") x 14" long, weighs 25 ounces
BulletPoint2 : These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
BulletPoint3 : Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
BulletPoint4 : The handles are bent up a few degrees from the back of the chisel allowing use as slicks
BulletPoint5 : The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0700667467856
ExternallyAssignedProductIdentifier2 : 700667467856
ItemName : Arno 467856 Solid Steel French Timber Framing Slick Chisel 40 mm (1-9/16 Inch) Wide x 14 Inches Long RC 58-60 PVC Dipped Handles
ItemPackageDimensions_Height : 38 centimeters
ItemPackageDimensions_Length : 2.3 centimeters
ItemPackageDimensions_Width : 7.4 centimeters
ItemTypeKeyword : wood-chisels
Manufacturer : Arno
Material : steel
ModelNumber : 467856
PartNumber : 467856
ProductDescription : These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage. They are hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck. The handles cant up a few degrees from the back of the chisel allowing use as slicks. The handles are dipped in PVC coating. The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up. These chisels are made by hand in small batches so the grinding may not always be absolutely perfect. They may have small slopes on the bevels and sometimes are not exactly perpendicular in their edge grinding. However, they are absolutely wonderful workman's chisels especially useful in timber framing work because of their length and robustness. These are the go to chisels to have when you want a good chisel that might get damaged in use in outdoor woodworking or general rough environments. Come with tip guards.Made in France.
ProductSiteLaunchDate : 2018-02-02T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.