Cart 2 india

Specification
Brand : wirenco
BulletPoint1 : Rated for 600-Volts with a Heat Capacity of up to 60 Degrees Celsius in Wet Locations and 105 Degrees Celcius in Dry Locations.
BulletPoint2 : Has an Allowable Ampacity of: 55 Amps at 60 Degrees Celsius, 65Amps at 75 Degrees Celsius, and 75 Amps at 90 degrees Celsius
BulletPoint3 : Can be Used in Wet or Dry Locations. Insulation is High Heat and Moisture Resistant Polyvinyl Chloride (PVC). Jacket is Abrasion, Moisture, Gasoline, and Oil Resistant Nylon
BulletPoint4 : Contains Copper (Cu) Conductors Made with Annealed (Soft), Compressed Copper
BulletPoint5 : #6 AWG Commercial Wiring for Outlets, Switches and Other Loads
Color : White
ConnectorType : Clamp
CurrentRating : 32 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 810080259072
ExternallyAssignedProductIdentifier2 : 0810080259072
ExternallyAssignedProductIdentifier3 : 00032886081026
IncludedComponents : 1 in 2 Out
ItemName : Wirenco 6 AWG 19-Stranded THHN White Copper Building Wire (50Ft Cut)
ItemPackageDimensions_Height : 27.5082 centimeters
ItemPackageDimensions_Length : 7.1882 centimeters
ItemPackageDimensions_Width : 21.6916 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electrical-wires
Manufacturer : wirenco
Material : Copper
Material1 : Polycarbona
Material2 : Stainless Steel
Material3 : Copper
ModelNumber : 161484-W
NumberOfItems : 1
NumberOfWires : 1
PartNumber : 161484-W
ProductDescription :

Applications:
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). 6 AWG THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type AWM conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations. Most common building wire used often on sub-panels, hot tubs & jacuzzis.

Also Known As:
Copper wire, THWN-2 Wire, building wire, hook up wire, conduit wire, hot tub wire, lighting wire, nylon copper wire, construction cable, 6 gauge wire

Features
Nylon outer jacket for easy pulling. VW-1 rated 14 AWG - 6 AWG. All sizes are rated gasoline and oil-resistant II.

Jacket:
A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.

Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
NEMA WC70/ICEA S-95-658
Institute of Electrical and Electronics Engineers

Constrction:
Insulation:Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8

Specifications:
Size:6 AWG
Number of Strands:19
PVC Insulation Thickness (Conductor):0.760 mm / 0.030 inches
Nylon Jacket Thickness:0.130 mm / 0.005 inches
Outside Diameter:6.30 mm / 0.248 inches
Weight per Foot: 0.109 lbs
Allowable Ampacity:55 Amps at 60℃ / 65 Amps at 75
ProductSiteLaunchDate : 2021-11-15T16:00:00.000Z
Size : 50Ft Cut
Strands : 19
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 600 volts