Cart 2 india

Specification
Brand : CAROL
BulletPoint1 : 30 AWG, Average wire diameter: 0.01 in. (0.254 mm), 0.6 Ohms/ft at 68°F
BulletPoint2 : Nickel 200 (99.6% commercially pure). Rated for temperatures up to 1446°C (2635°F).
BulletPoint3 : 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
BulletPoint4 : PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
BulletPoint5 : ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Color : Black
ConnectorType : Crimp
ExternallyAssignedProductIdentifier : 7440105605534
ExternallyAssignedProductIdentifier1 : 702082772935
ExternallyAssignedProductIdentifier2 : 0702082772935
ItemDisplayWeight : 0.24 ounces
ItemForm : Coil
ItemName : TEMCo Pure Nickel Wire 30 Gauge 50 Ft non resistance AWG Ni200 Nickel 200Êga
ItemPackageDimensions_Height : 10.2 centimeters
ItemPackageDimensions_Length : 0.8 centimeters
ItemPackageDimensions_Width : 10.2 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : electrical-wires
Manufacturer : TEMCo
Material : nickel
MaximumVoltage : 600 volts
MeasurementSystem : Imperial
ModelNumber : RW0209
NumberOfItems : 10
NumberOfWires : 4
OperatingVoltage : 600 volts
PartNumber : RW0209
ProductDescription : Nickel 200 is a ferromagnetic, commercially pure (99.6%) wrought Nickel with good mechanical properties over a wide range of temperatures, high ductility, and excellent resistance to many corrosives (in particular hydroxides). Ni 200 is used for a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalies. Nickel 200 has roughly the strength of mild steel when annealed. Its low annealed hardness and very low work-hardening rate makes it desirable for cold forming operations such as deep drawing, spinning, coining, etc. Used in corrosion-resistant equipment such as caustic evaporators, spun anodes, combustion boats and laboratory crucibles, and electronic components where its excellent fabricating characteristics provide an advantage. Nickel 200 exhibits good thermal and electrical properties. Its magnetostrictive properties (specifically significant length change when magnetized) make it ideal for use in sonic devices such as sonar or for control in ultrasonic welding. Made in the USA.
ProductSiteLaunchDate : 2014-07-17T14:53:58.034Z
Size : 30 AWG
SpecificationMet : UL
Strands : Single Strand
StudSize : 1/4
Style : 50 ft
SupplierDeclaredDgHzRegulation : not_applicable
TemperatureRating : 221 degree celsius
TerminalType : Ring Terminal
UnitCount : 1
Voltage : 300 volts