Cart 2 india

Specification
Brand : Adornville
BulletPoint1 : This solder is Cadmium free. You will receive three 12 inch lengths of wire (30.48cm); one of each kind: Easy, Medium & Hard silver solder. Works with a torch. Cut with wire cutters. Hammer it flat, if placing in a position where the solder will roll. This solder is also great for employing the "stick soldering" method. This solder works with all types of silver. Use any type of flux used with precious metals.
BulletPoint2 : Clean and flux the solder and the metal to be joined. Cleaning can be done by lightly sanding and/or washing each piece with dish soap and rinsing/drying before use. Solder will not flow where dirt or finger oils are present. This fact can be used to make solder stay in place and avoid areas where it should not flow. There are products on the market that work in this way.
BulletPoint3 : Use as little solder as possible to make a secure joint. This will make for less clean-up and a prettier joint. Make sure your ends are perfectly filed to make a joint that shows no light or gaps when ends are butted together. Solder will not fill gaps. Start with hard solder for your beginning joints, then go to medium and finally easy, if needed.
BulletPoint4 : Having 3 different melting temperatures helps when you have many solder joints to perform, so the first joints won't melt as the last solders are made. Be sure to take the heat away as soon as the solder flows, or it won't matter that the Hard and Medium solders flow at higher temperatures. If the heat is on the piece too long, all the joints will melt and pull apart.
BulletPoint5 : Are finishing end for jewelry beading wire to prevent breakages form occurring pressure point formed FashionDesign: pre curved shape to cradle and protect your from fraying, great for earrings, bracelets and necklaces.
Color : Silver
ExternallyAssignedProductIdentifier1 : 0819609020469
ExternallyAssignedProductIdentifier2 : 819609020469
ExternallyAssignedProductIdentifier3 : 00035926132313
FinishType : Polished
GpsrSafetyAttestation : 1
ItemForm : Coil
ItemName : Adornville™ Silver Wire Solder Variety Pack 1Easy+1Med+1Hard 22 Gauge 12 Inches/30.48cm Each by EAM Jewelry Design & Supply, LLC
ItemPackageDimensions_Height : 5.8928 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 5.4102 centimeters
ItemPackageQuantity : 1
ItemShape : Round Rod
ItemTypeKeyword : jewelry-making-wire
Manufacturer : EAM Jewelry Design & Supply, LLC
Material : Silver
ModelNumber : AWBMCWB-1MM-B-2R
NumberOfItems : 3
NumberOfPieces : 300
PartNumber : SilverWireSolder
ProductDescription :

• Country of origin: United States
• CADMIUM FREE
• Silver Solder
• Silver Amount: Easy 65%, Medium 70%, Hard 75%
• Form: Wire
• Melting Temperature: Easy 1,325°F (718°C), Medium 1,360°F (738°C), Hard 1,450°F (788°C)
• Metal color: White/Silver
• Dimension: 22 Gauge, 12 Inches each, 3 lenghts of wire : 1 Easy, 1 Medium, 1 Hard

ProductSiteLaunchDate : 2021-06-22T19:49:10.692Z
RecommendedUsesForProduct : Jewelry Making
Size : 1 FT
Style : 6 Gauge
SupplierDeclaredDgHzRegulation : not_applicable
TensileStrength : 150 megapascals
UnitCount : 1
UnspscCode : 23271800