Cart 2 india

Specification
Brand : Stock Wire
BulletPoint1 : #12 AWG Residential Wire for Outlets, Switches and Other Loads
BulletPoint2 : Copper (Cu) Conductors
BulletPoint3 : For Dry Locations up to 90 degrees Celsius or 194 degrees Farenheit. For Exposed and Concealed Applications.
BulletPoint4 : 600-Volt Maximum with an Allowable Ampacity of 20 Amps
BulletPoint5 : Equivalent to Romex NM-B - Color of Wire May not be the Same as the Picture Shown.
Color : Yellow
ConnectorGender : Female-to-Male
ConnectorType : standard 4 pin 240 male connector
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 680226296304
ExternallyAssignedProductIdentifier2 : 0680226296304
ExternallyAssignedProductIdentifier3 : 00036683270089
InputCurrent : 50 amps
ItemLength : 48 inches
ItemName : 12/2 NM-B, Non-Metallic, Sheathed Cable, Residential Indoor Wire, Equivalent to Romex (250FT Cut)
ItemPackageDimensions_Height : 34.544 centimeters
ItemPackageDimensions_Length : 7.62 centimeters
ItemPackageDimensions_Width : 34.29 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electrical-wires
Manufacturer : Stock Wire
Material : Copper
ModelName : American Power Pull - Fence & Wire Grip (PP7008)
ModelNumber : 6215
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfWires : 2
PackageLevel : unit
PartNumber : 6215
PowerSourceType : hand_powered
ProductDescription :

Applications:
Non-metallic sheathed NM-B cable is used in normally dry installations in residential wiring, as branch circuits for outlets, lighting and other residential loads. Its applications are outlined in NEC 2008 and NEC 2011 Article 334. NM-B is rated at 600 volts and although it is rated at a conductor temperature of 90°C dry , its ampacity is limited to 60°C according to the NEC 2008 and NEC 2011. It may be fished through masonry or tile walls, where not exposed or subject to excessive moisture or dampness. NM-B cables are LEAD FREE and RoHS compliant. Equivalent to Romex NM-B.

Standards:
Meets or exceeds all applicable ASTM specifications
UL Standard 83: Thermoplastic Insulated Wires and Cables
UL Standard 719: Non-Metallic Cables
Federal Specification A-A-59544 and requirements of the NEC
Voltage rating - 600 volts

Construction:
Insulation:Color coded polyvinyl chloride (PVC) compound with a nylon covering meeting the required thickness of Type THHN. Conductor insulation is rated 90℃C
Sheath:30 mil color coded PVC sheath rated 90℃C is applied over the completed assembly

Specifications:
Size:12 AWG
Number of Conductors:2
PVC Insulation Thickness:0.76 mm / 0.029 inches
Ground Wire Size:10 AWG
Nylon Thickness:0.13 mm / 0.005 inches
Nominal Cable Dimensions: 14.2 mm x 0.55 inches
Weight per Foot: 0.254 lbs
Allowable Ampacity: 20 Amps

ProductSiteLaunchDate : 2018-10-10T07:00:00.000Z
Size : 250FT Cut
Strands : 30
StreetDate : 2020-12-02T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 250
Voltage : 600 volts