Cart 2 india

Specification
Brand : Platinum Tools
BulletPoint1 : Adjustable stripping depth
BulletPoint2 : Adjustable stripping length
BulletPoint3 : Uses drop in replacement blades, no cassettes required
BulletPoint4 : Hex wrench snaps into housing
BulletPoint5 : 【Troubleshooting】If the cables wires are blocked in the axises, please check: If the springs on the press wheels are too tight, loose them; There are too much oil on the cables/wires, please wipe it.
Color : Blue
ExternallyAssignedProductIdentifier1 : 899740000964
ExternallyAssignedProductIdentifier2 : 0899740000964
ExternallyAssignedProductIdentifier3 : 00899740000964
ItemName : Platinum Tools Platinum Tools 15034C 3 Level Coax Stripper for RG59/62/6/6Quad Clamshell
ItemPackageDimensions_Height : 2.794 centimeters
ItemPackageDimensions_Length : 10.922 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wire-strippers
Manufacturer : Platinum Tools
Material : Plastic
ModelName : Wire Stripper for Drill
ModelNumber : 15034C
NumberOfItems : 1
OperationMode : Manual
PartNumber : 15034C
ProductDescription : Item included: 1set 110V 370W Electric Automatic Wire Stripper Machine Copper Cable Peeling Machine (153082）
Wire Stripping range: Φ0.059"~1.49"(Φ1.5mm~ 38mm)

Use notice
1. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades.
2. On the output side, if the cuts on the cables/wires are too deep, please check below points:
1) Please adjust the handles on the input side, screw down or loose them. (M12 handles)
2) Check whether the cables/wires on the right position as you feeding them.
3) Make sure the blades are sharp, if not, polish them with the oil stone.
3. On the output side, if see the plastic (PVC) has been stripped, but the copper wires can not been disgorged, please check below 4 points:
1) polish the axis of the upside with the oil stone.
2) Check whether the springs are loose, if yes, screw down to make them tighten.
3) The diameter of the cables/wires are too small, please adjust the space between the two axises to 0.3-0.6mm.

ProductSiteLaunchDate : 2011-10-19T19:41:40.554Z
Size : Dia 1.5-38mm
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 8
Voltage : 110 volts
Wattage : 370 watt_hours