Cart 2 india

Specification
Brand : Platinum Tools
BulletPoint1 : For use with round, oval and flat wire cable
BulletPoint2 : Package Dimensions: 2.032 H x 16.764 L x 9.144 W (centimetres)
BulletPoint3 : Package Weight: 0.400 pounds
BulletPoint4 : Country of Origin : Wales
BulletPoint5 : 【Troubleshooting】If the cables wires are blocked in the axises, please check: If the springs on the press wheels are too tight, loose them; There are too much oil on the cables/wires, please wipe it.
Color : Blue
ExternallyAssignedProductIdentifier1 : 899740000773
ExternallyAssignedProductIdentifier2 : 0899740000773
ExternallyAssignedProductIdentifier3 : 00899740000773
ItemName : Platinum Tools 15305 Minim 2.5 Self Adjusting Wire Stripper 30-13 AWG Box
ItemPackageDimensions_Height : 2.032 centimeters
ItemPackageDimensions_Length : 16.764 centimeters
ItemPackageDimensions_Width : 9.144 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wire-strippers
Manufacturer : Platinum Tools
Material : Plastic
ModelName : Wire Stripper for Drill
ModelNumber : 15305
NumberOfItems : 1
OperationMode : Manual
PartNumber : 15305
ProductDescription : Item included: 1set 110V 370W Electric Automatic Wire Stripper Machine Copper Cable Peeling Machine (153082）
Wire Stripping range: Φ0.059"~1.49"(Φ1.5mm~ 38mm)

Use notice
1. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades.
2. On the output side, if the cuts on the cables/wires are too deep, please check below points:
1) Please adjust the handles on the input side, screw down or loose them. (M12 handles)
2) Check whether the cables/wires on the right position as you feeding them.
3) Make sure the blades are sharp, if not, polish them with the oil stone.
3. On the output side, if see the plastic (PVC) has been stripped, but the copper wires can not been disgorged, please check below 4 points:
1) polish the axis of the upside with the oil stone.
2) Check whether the springs are loose, if yes, screw down to make them tighten.
3) The diameter of the cables/wires are too small, please adjust the space between the two axises to 0.3-0.6mm.

ProductSiteLaunchDate : 2011-10-23T03:28:21.311Z
Size : Dia 1.5-38mm
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 370 watt_hours