Specification Brand : INTBUYING BulletPoint1 : 【Convenient Operation】110V 370W automatic electric wire stripper machine SMS-38, whole size is 24.8x11.81x15.16in. It is easy to operate and convenient to carry, it can process single core copper wire, twin cores copper wire. BulletPoint2 : 【Dia 0.06-1.5in Wire Stripping】Wire stripping range is Dia 1.5-38mm (0.06-1.5in) and make sure the cables diameter are similar with the feeding holes, large wires in large feeding holes, small wires in small feeding holes, flat wires in flat feeding holes. BulletPoint3 : 【11 Channels/10 Blades】Equipped with 11Channels 10 blades for easy access to any cable or wire from the smallest to the largest. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time. BulletPoint4 : 【Fast Stripping/Cut the Cables】Automatic wire strippers lead to fast stripping speed, fixed machine position, safe and reliable use. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades. BulletPoint5 : 【Troubleshooting】If the cables wires are blocked in the axises, please check: If the springs on the press wheels are too tight, loose them; There are too much oil on the cables/wires, please wipe it. Color : Blue ExternallyAssignedProductIdentifier1 : 0723508849673 ExternallyAssignedProductIdentifier2 : 723508849673 ItemName : INTBUYING Cable Wire Stripping Machine, Electric Automatic Wire Stripper Machine, Waste Aluminum Scrap Copper Cable Strip Peeler, 11Channels 10 Blades for Dia 0.06-1.5in Scrap Cable Recycling ItemPackageDimensions_Height : 19 inches ItemPackageDimensions_Length : 29 inches ItemPackageDimensions_Width : 15 inches ItemPackageQuantity : 1 ItemTypeKeyword : wire-strippers Manufacturer : INTBUYING Material : Metal ModelName : Wire Stripper for Drill ModelNumber : Ichiiasohcg1si9wx NumberOfItems : 1 OperationMode : Manual PartNumber : T153082 ProductDescription : Item included: 1set 110V 370W Electric Automatic Wire Stripper Machine Copper Cable Peeling Machine (153082) Wire Stripping range: Φ0.059"~1.49"(Φ1.5mm~ 38mm)
Use notice 1. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades. 2. On the output side, if the cuts on the cables/wires are too deep, please check below points: 1) Please adjust the handles on the input side, screw down or loose them. (M12 handles) 2) Check whether the cables/wires on the right position as you feeding them. 3) Make sure the blades are sharp, if not, polish them with the oil stone. 3. On the output side, if see the plastic (PVC) has been stripped, but the copper wires can not been disgorged, please check below 4 points: 1) polish the axis of the upside with the oil stone. 2) Check whether the springs are loose, if yes, screw down to make them tighten. 3) The diameter of the cables/wires are too small, please adjust the space between the two axises to 0.3-0.6mm.
ProductSiteLaunchDate : 2020-12-07T05:15:34.854Z Size : Dia 1.5-38mm Style : Modern SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 8 Voltage : 110 volts Wattage : 370 watt_hours