Cart 2 india

Specification
Brand : XURON
BulletPoint1 : Ergonomic grips are elegant yet comfortable.
BulletPoint2 : Smooth, non-glare finish. Lap joint screw for strength and perfect blade alignment.
BulletPoint3 : Stainless steel, dual leaf spring.
BulletPoint4 : 63 Rockwell Hardness.
BulletPoint5 : Full Flush Cut, Maximum cut: 18ga (copper) wire.
BulletPoint6 : This is an O.E.M. part
Color : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0654207227052
ExternallyAssignedProductIdentifier2 : 654207227052
ExternallyAssignedProductIdentifier3 : 00867200000410
IncludedComponents : pipe-fittings
ItemDisplayWeight : 1 pounds
ItemLength : 9.45 inches
ItemName : Xuron Xbow Es5352 Large Tapered Head Cutter - Full Flush | PLR-ES5352
ItemPackageDimensions_Height : 17.3 centimeters
ItemPackageDimensions_Length : 2.5 centimeters
ItemPackageDimensions_Width : 11.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wire-cutters
Manufacturer : Xuron
Material : Stainless Steel
ModelName : GW.2UC
ModelNumber : PLR-ES5352
NumberOfItems : 5
PartNumber : PLR-ES5352
PowerSourceType : AC110V/220V
ProductDescription : Attention: Please read all the instructions and basic preventive measures during operation on the user manual attached in the box. You must read it carefully before your using operation for your own safety’s sake. Thank you!

Description:
This hot knife heating cutter is a kind of convenient and practical cutting tool specially for cutting foam, EPE foam, sponge, etc.
It can change different blades with different length.
The fabric hot cutter is a wonderful tool with good cutting effect.
There is no rough edges after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutter blade can up to 400°C and it can rise to 400°C within 6 seconds.
Also, the instructure is reasonable and comfortable to use.
Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.

Specification:
Voltage: 110V±10% / 220V±10%
Power: 150W
Length of the Wire: 3M
Dimesion: 24 x 4.5 x 3.5cm

Feature:
Hot Knife Blade is changeable for 150mm blade and 100mm blade
1/4 minute intermittent operation.
No rough edges after cutting.

Usage:
1.Adjust the temperature wheel in the middle position and set the blade on the object.
2.Turn on the shift and warm up the tool for seconds before cutting—recommend to test on the waste materials before cutting.
3.Keep the consistency of the temperature and speed.
4.When uneven cutting appears, please cooling down the blade temperature or loosen the switch for intermittence.
5.After using the period of time, please use wire brush for cleaning.

Notes:
1.Please do not overexpose the blade.
2.Please use proper cutting temperature and speed as if not doing this so, the blade will become soft and bend twisted.
3.This is150w hot knife cutter, please do not use too high temperature, grade 5 or 6 is enough.
ProductSiteLaunchDate : 2017-10-17T07:00:00.000Z
SpecificUsesForProduct : Cutter
StreetDate : 2017-09-20T00:00:01Z
Style : Electric,Manual
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 5
Wattage : 150 watts