Cart 2 india

Specification
AirFlowCapacity : 0.5 cubic_meters_per_minute
Brand : TECHTONGDA
BulletPoint1 : @【V Groove Guide】~ Use the V-notch as guide during cutting to assure quality. High efficiency and the speed is adjustable, Vmax=200mm/s.
BulletPoint2 : @【Precision rail】~Adjustment range for upper blade:0～15mm. Micro adjustable according to PCB thickness and solve uneven thickness problem generated by V-CUT.
BulletPoint3 : @【High Efficiency】~ Use machine to cut so that it minimizes the stress and prevents welding point crack. High accuracy and safety. It is easy to maintain. Machine is delicate and it is easy for operation.
BulletPoint4 : @【Pay Attention】~ Never allow the upper and lower blades to be in vertical contact; they should be misaligned left and right to avoid damage to the blades. The distance between the left and right of the blade has been adjusted, about 0.05-0.1mm.
BulletPoint5 : @【Widely Application】~It is mainly used in LED industry, SMT industry, mobile phone industry, electric toy industry, all kinds of electronic industry and circuit board industry. Plastic board, fibreboard, suitable for cutting all kinds of PCB with v-cut, SMT circuit board, aluminum substrate, LED circuit board, LED lamp strip, good effect, fast speed, do not damage the components on the circuit board.
Color : Blue
ExternallyAssignedProductIdentifier : 4907587308115
ExternallyAssignedProductIdentifier1 : 0748497540141
ExternallyAssignedProductIdentifier2 : 748497540141
IncludedComponents : No
ItemName : TECHTONGDA V-cut PCB Cutting Machine Groove Cutter Separator Machine for Pcb Separating with Fixed Blade110V
ItemPackageDimensions_Height : 14 inches
ItemPackageDimensions_Length : 22 inches
ItemPackageDimensions_Width : 21 inches
ItemPackageQuantity : 1
ItemTypeKeyword : wire-cutters
Manufacturer : TECHTONGDA
Material : Metal
MaximumOperatingPressure : 0.5 unknown_modifier
ModelName : Air Nipper
ModelNumber : 9244SL
NumberOfItems : 1
PartNumber : 022324
PowerSourceType : ac
ProductDescription : Attrntion:
1. Do not remove the guard around the blade under any circumstance, in order not to cause any danger.
2. The machine is only designed for circuit board with pre-scored V-cut, do not use in other purposes.
3. When operating this machine, do not wear too loose clothes. Long hair should be tied up to prevent it from being entangled.
Operation Instruction
1. Connect to the power supply and start the switch.
2. Adjust the gap between the upper and lower blades.
3. The upper and lower cutters must be in the same plane, and the error cannot exceed 0.1mm.
4. Set the cutting travel and speed
5. Step on the pedal switch, and try sometimes. In case of no abnormity, formal work can be started.
Parameter:
Voltage :AC110V/60Hz
Power :40 W
Thickness of Cutting Range:0.6mm-1.6mm
Cutting Speed :0-200mm/s
Height of Upper PCB :≤ 20mm
Height of Lower PCB :≤ 10mm
Inner Side of PCB Range :≤ 240mm
Upper Blade Adjust Range :0-15mm
Operating Temperature :10-35 ℃
Storage Temperature :-20-50 ℃
Machine Size(L x W x H) :15.6*12.4*16.4 in.
Item Include(022324)
PCB Cutting Machine.
Power Wire.
Manual
Hexagonal Wrench

ProductSiteLaunchDate : 2019-11-06T08:00:00.000Z
RecommendedUsesForProduct : Cutting
Size : Large Slotting Plate Set
Style : Retractable
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27111511
Voltage : 110 volts