Cart 2 india

Specification
Brand : Marvel
BulletPoint1 : Total length: 8.3 inches (210 mm)
BulletPoint2 : Maximum Cutting Capacity: 1.6 inches (40 mm)
BulletPoint3 : Weight: 24.3 oz (720 g)
BulletPoint4 : Sharp Edge: The ratchet cable cutter's edge is professionally hardened to provide a hardened hardness of 45 HRC. This sharp and hardened edge allows for efficient cutting with ease.
BulletPoint5 : Long Service Life: The edge of the blade is galvanized, which improves its corrosion and rust resistance so that the ratcheting cutter's service life is extended.
BulletPoint6 : Product 2: 21-degree
BulletPoint7 : Product 2: 2.5mm heat-treated carbon steel construction provides durability and long life
BulletPoint8 : Product 2: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
Color : Black
ExternallyAssignedProductIdentifier : 4992456200928
IncludedComponents1 : 1*Ratchet Cable Cutter
IncludedComponents2 : 1*Hexagonal Wrench 1*Triangular File
IncludedComponents3 : 1*Geared Brass Wire Brush
IncludedComponents4 : 1*Carrying Bag
IncludedComponents5 : 1*English Manual
ItemName : Marvel MRC-K3 Ratchet Cable Cutter (Copper Wire Only)
ItemPackageDimensions_Height : 280 millimeters
ItemPackageDimensions_Length : 50 millimeters
ItemPackageDimensions_Width : 90 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wire-cutters
Manufacturer : マーベル(Marvel)
Material : Metal
Material1 : Spring Steel
Material2 : Alloy Steel
Material3 : Rubber
ModelName : ラチェットケーブルカッター(銅線専用)
ModelNumber : MRC-K3
NumberOfItems : 1
PartNumber : MRC-K3
Pattern : Cutter + Wire Stripper
ProductDescription :

Specification

Model: J75

Material: Spring Steel, Steel, Rubber

Color: Black, Silver

Process: Galvanization, Quenching

Gear: Single Gear

Cutting Range: ≤7.5cm/2.95in

Handle Retractable Length: About 15cm/5.9in

Gross Weight: 3.7kg/8.15lbs

Net Weight: 3kg/6.61lbs

Package Size: 43*24*17cm/17.71*9.44*6.69in

Product Size: 41.6-58.7*20*5.5cm/16.37-23.11*7.87*2.16in

Package Included

1*Ratchet Cable Cutter

1*Allen Key

1*Triangular File

1*Geared Brass Wire Brush

1*Carrying Bag

1*English Manual

Way of Use

1. Rotate the handle sheath to the inside. The handle is free to retract. Rotate the handle sheath to the outside, the handle length is locked. The handle extends to cut thicker cables easily.

2. The movable handle is unlocked when the handle is extended, which allows you to swing it up and down freely for easy use.

3. Turn the rotary cutter blade clockwise to clamp the cable and then trigger the movable handle until the cable is cut.

4. In the cutting process, if you want to return the knife, you can lock the movable handle and then tinker with the brace red block. At this point, the hand holding the movable handle can be released. Then rotate the blade counterclockwise.

5. After cutting, the movable handle will be close to the fixed handle until it is completely retracted and locked, so that the handle can be fixed.

Notes

1. The cable cutter for hammering or being hammered, so as not to deform the blade damage, the cable cutter is not allowed to connect the long handle at will to use.

2. The different specifications of the cable cutter have a different range of use and do not exceed the scope of use.

3. The active handle each time you toggle, use the rotating handle to advance a tooth, and make a 'blah blah blah' sound, such as no sound, indicating that the cable cutter internal failure, should be repaired promptly.

4. The cable cutter after a long time, the knife mouth will inevitably be damaged, at this time available oil stone or high-speed grinding head repair, such as serious damage should be replaced promptly.

5. The handle of the insulation sheath should often check, do not allow a break.

6. Check all the screws on the end cover plate, such as loose ones should be re-tightened once, and the oil hole should be as often as possible to inject lubricant.

7. The product cannot be used to shear steel strands.

ProductSiteLaunchDate : 2024-08-09T21:23:58.664Z
Size : HS-325A
SpecificUsesForProduct : Cutter
Style : Hand Tool
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112100