Cart 2 india

Specification
Brand : Ewandor
BulletPoint1 : ► Quick release wing nut / lock nut for speeding the wheel balancing process. It makes the wheel balancing process faster by quickly locking the wheel on the shaft. Its quick release threads allow quick nut to slide in and out of its locking position when its release lever is pressed. Suitable for any wheel balancer this locking wing nut features with a quick release function enabling you to slide it off after use instead of taking the time to undo it.
BulletPoint2 : ► Once the wheel and cone are correctly positioned on the shaft, simply use the wing nut to lock them into place keeping them steady and tight during the wheel weight placement process. The wing nut is one of the most common replacement parts on wheel balancer the wing nuts are replaced several times during the useful life. Usually, the teeth that grab onto the shaft wear down and cause failure. A common indicator of the wing nut failing is the failure to hold pressure on the wheel.
BulletPoint3 : ► The quick hub wing nut is made of plastic material, durable and high quality, The quick wing nut helps up the balancing process with its quick release threads. This tool allows the wing nut to slide in and out of position when the release lever is pressed, which is very convenient to use. There are four dimensions of wheel balancer quick release hub wing nuts for your selection. It fits well with launch wheel balancers and more.
BulletPoint4 : ► Check the diameter and the thread spacing on your wheel balancer shaft before placing your order. To find the diameter, simply measure the maximum width across the central section of the end of the balancer shaft itself. To find the thread pitch, first count out ten thread splines then measure from the inside edge of the first spline to the inside edge of the tenth spline. Take this measurement in millimeters and divide it by ten.
BulletPoint5 : ► Package includes Quick-Nut × 1, Pressure Cup × 1, Protective Ring × 1, Pressure Ring × 1. This quick release wing nuts suit most wheel balancers and most shaft sizes. Please follow the steps to confirm the fitment before placing your order. Step ①, measure the pitch of threaded shafts. Step ②, count the number of threads over 4 cm. Step ③, 13 Threads = 3.0 mm Pitch Thread, 12 Threads = 3.5 mm Pitch Thread, 12 Threads = 4.0 mm Pitch Thread.
BulletPoint6 : Made of high quality stainless steel, these wing nuts are durable with long service life.
Color : Mid-Night Black
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 9077713319300
ExternallyAssignedProductIdentifier1 : 0700306951104
ExternallyAssignedProductIdentifier2 : 700306951104
FinishType : Polished
FitType : Universal
GradeRating : Industrial
ItemName : Wheel Balancer Wing Nut, Quick Release Wing Lock Nut, Quick-Nut, Hub Nut for Standard Threaded ⌀ 38 mm Shaft with 3 mm Screw Thread Pitch, Manual Locking Replacement Part for Balancing Machine, 38x3mm
ItemPackageDimensions_Height : 90 millimeters
ItemPackageDimensions_Length : 280 millimeters
ItemPackageDimensions_Width : 95 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wing-nuts
Manufacturer : Ewandor
ManufacturerGrade : Grade 304
Material : Stainless Steel
MetalType : Stainless Steel
ModelNumber : AM5602N1606CA-FBA
NumberOfItems : 1
NumberOfPieces : 10
PartNumber : 700306951104
ProductDescription : Wing Nuts/Butterfly Nut
material: 304 Stainless Steel
Material: Stainless steel
Model Number: M4 M5 M6 M8 M10 M12 M14 M16 M20 M24
Type: Wing Nuts

quantity: 1/2/3/5pcs as you choosed
ProductSiteLaunchDate : 2022-10-30T13:18:38.036Z
Size : Quick-Nut, 38x3mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161700