Specification Brand : Penn State Industries BulletPoint1 : This is a woodturning project kit; Hardware parts only; A LATHE IS NEEDED TO 'TURN' INTO FINISHED BOTTLE STOPPER; Blanks, drill bit, and all other turning tools and supplies are not included BulletPoint2 : Includes (6) BS1 Chrome Classic Bottle Stopper Woodturning Project Kits BulletPoint3 : Threaded post on each bottle stopper hardware measures 3/8" x 16tpi BulletPoint4 : Requires a 5/16" drill bit; Minimum blank size needed to turn is 2" x 2" x 2" BulletPoint5 : Graduated silicone gasket makes a snug seal; Classic Bottle Stoppers sit slightly higher in the bottle than our Vintage Bottle Stopper Kits Color : Chrome ExternallyAssignedProductIdentifier1 : 721782103818 ExternallyAssignedProductIdentifier2 : 0721782103818 ItemName : Penn State Industries BS1 Classic Bottle Stopper Kit Woodturning Project (6, Chrome) ItemPackageDimensions_Height : 4.5 inches ItemPackageDimensions_Length : 8 inches ItemPackageDimensions_Width : 5 inches ItemPackageQuantity : 6 ItemShape : Heart ItemTypeKeyword : wine-bottle-stoppers Manufacturer : Penn State Industries Material : Other ModelNumber : BS1 NumberOfItems : 1 PartNumber : BS1 ProductDescription : This is a woodturning project kit; Hardware parts only; A LATHE IS NEEDED TO 'TURN' INTO FINISHED BOTTLE STOPPER; Blanks, drill bit, and all other turning tools and supplies are not included. Includes (6) BS1 Chrome Classic Bottle Stopper Woodturning Project Kits. Threaded post on each bottle stopper hardware measures 3/8" x 16tpi. Requires a 5/16" drill bit; Minimum blank size needed to turn is 2" x 2" x 2". Graduated silicone gasket makes a snug seal; Classic Bottle Stoppers sit slightly higher in the bottle than our Vintage Bottle Stopper Kits (BS8, BS8TNG, BS8TNBK, and BS8L). ProductSiteLaunchDate : 2018-05-25T07:00:00.000Z SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 UnspscCode : 52150000