Cart 2 india

Specification
Brand : Zunate
BulletPoint1 : 【High Performance】 Professional wind direction sensor, better linearity, high accuracy, no dead spot, strong to thunderstrike, easy to observe, stable and
BulletPoint2 : 【Accuracy And Design】 360° wind direction sensor adopts accuracy angle sensor inside, accurate measurement. Easy to install, designed with a fixed south line, easy to use.
BulletPoint3 : 【Premium Materials】 This anemometer instrument uses low inertia ABS wind vane to respond to the wind direction, better dynamic characteristics, not easy to damage, bring you a better using experience.
BulletPoint4 : 【Working Principle】 Wind direction anemometer is mainly used to measure the wind direction, its working principle is usually based on the rotating type, which can accurately measure the wind direction.
BulletPoint5 : 【Applicable Fields】This instrument is commonly used in meteorology, environmental monitoring, aerospace and other fields to understand the wind situation and make corresponding countermeasures.
Color : Black
ItemName : 360° Wind Direction Anemometer, IP64 Outdoor Wind Speed Gauges, Professional Wind Direction Sensor Anemometer Instrument for Garden DC9 to 30V
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 24 centimeters
ItemPackageDimensions_Width : 21 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : anemometers
Manufacturer : Zunate
Material : Acrylonitrile Butadiene Styrene (ABS)
ModelName : Zunateihbyw3d2qv
ModelNumber : Zunateihbyw3d2qv
PartNumber : Zunateihbyw3d2qv
ProductDescription : Specification:
Item Type: Wind Direction Sensor
Material: ABS
Size: Approx. 223 x 190 x 70mm / 8.8 x 7.5 x 2.8in
Gross Weight: Approx. 375g / 13.2oz
Power Supply Voltage: DC9-30V
Output: RS485 for Modbus
Measuring Range: 0‑359° All Round
Extension Line Length: 0.8m / 2.6ft
Accuracy: Full Range: ±3 Degree
Resolution: Full Range: 1 Degree
Starting Wind Speed: ≤0.8m/s
Maximum Power Consumption: 0.48W
Load Capacity: DC12V Power Supply, Current Output Impedance ≤350Ω, DC24V Power Supply, Current Output Impedance ≤900Ω
Voltage Output Impedance: ≥1KΩ
Operating Environment: Temperature -35℃-60℃, Humidity ≤100%RH No Condensation
Waterproof Level: IP64
Cable Level: Rated Voltage: 300V 80℃
Wide Application: Suitable for Wind Direction Measurement in Gardens, Greenhouses, Weather Stations, Ships, Docks, Aquaculture, Advertising Barriers, Meteorology, Marine, Environmental, Airports, Ports, Laboratories, Agriculture, And Transportation Environments
Installation Aperture: 3.2mm / 0.1in
Aerial Insert Diameter: 15mm / 0.6in (Recommended to Reserve 25mm for Wiring, Connect the Wires First, Then Install and Fix the Sensor)
Wiring Method:
Red Wire: Power Positive (Voltage, Current, Pulse), Power Positive (RS485)
Black Wire: Power Negative (Voltage, Current, Pulse), A+ (RS485)
Yellow Wire: (Voltage, Current, Pulse), B- (RS485)
Green Wire: Power Negative (RS485)
Standard for ModBus RTU Communicating Protocol:
First, the serial port format: Data bits 8 bits, stop bit 1 bit, parity bit none, default baud rate 9600bps, serial port software set to hex send and receive, two communicate intervals of at least 500ms or more, CRC in the manual for the parity bit, 2 bytes.
ProductSiteLaunchDate : 2025-02-18T00:00:00.000Z
Size : 1
UnspscCode : 53120000