Cart 2 india

Specification
Brand : Pferd
BulletPoint1 : Power abrasive filament non-wire brush
BulletPoint2 : For deburring, honing, edge radiating, light cleaning, and polishing
BulletPoint3 : Available in 80 grit size
BulletPoint4 : 4500 rpm maximum rotational speed
BulletPoint5 : Made in the usa
Color : Multicolor
CompatibleMaterial : Alloy Steel
Configuration : Refer to description
ExternallyAssignedProductIdentifier1 : 697940841208
ExternallyAssignedProductIdentifier2 : 0697940841208
ExternallyAssignedProductIdentifier3 : 00697940841208
HandOrientation : Refer to description
IncludedComponents : Refer to description
ItemDisplayDimensions_Depth : 1.57 inches
ItemDisplayDimensions_Diameter : 3.94 inches
ItemDisplayDimensions_Height : 1.57 inches
ItemDisplayDimensions_Length : 3.94 inches
ItemDisplayDimensions_Width : 1.57 inches
ItemName : PFERD 84120 M-Brad High Density Composite Disc Brush, Silicon Carbide Grain, 3" Diameter, 0.040 Round Filament, 4500 RPM, 80 Grit
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : abrasive-wheel-brushes
Manufacturer : PFERD Inc.
Material : Silicon Carbide
Material1 : Acrylonitrile Butadiene Styrene
Material2 : Rubber
Material3 : Plastic
Material4 : Polyethylene Terephthalate Glycol
Material5 : Polylactic Acid
ModelName : DISPRA-MK3NG46DPR12MT2Q3NT8
ModelNumber : 84120
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 84120
Pattern : Refer to description
ProductDescription : Feature:
Very Useful 3D Printer Part and Accessories, extend your nozzle’s and hot-end’s useful life.
The anti-static filament cleaner wipes lint, dust, or other dirt before the filament enters your printer's valuable extruder and nozzle. It can be used with Direct-Drive and Bowden Extruders, dust, hair, small plastic, or other material shavings are wiped off the surface of the filament, extend your nozzle's and hot-end's useful life.
Special Design: The filament cleaner blocks are made from crack resistant rubber foam material. It conveniently slips over standard 1.75, 3.0mm diameter ABS, PLA or other 3D printing filaments.
1. As most filaments are made from plastics, they are often statically charged and attract all sorts of debris from around your filament storage or work space.
2. As most consumer grade 3D printers use an open Spool design, it is important to address this issue.
3. As hot-ends, extruders and nozzles are getting more and more sophisticated and monolithic, repair or replacement is costly and also can incur quite some printer down-time.
4. How it works: the anti-static filament cleaner wipes lint, dust, or other dirt before the filament enters your printer’s valuable extruder and nozzle.
5. Has two guides for both 1.75mm and 3mm filaments.

3 x 1.75mm Filament Cleaners
3 x 2.85/3.0mm Filament Cleaners
1 x Storage Box
ProductSiteLaunchDate : 2017-10-21T08:00:01.000Z
Size : Refer to description
StreetDate : 2017-10-21T00:00:01Z
Style : 22mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1