Cart 2 india

Specification
Brand : Pferd
BulletPoint1 : Power threaded knot wheel wire brush
BulletPoint2 : Ideal for the tough brushing applications where surface finish is a low priority
BulletPoint3 : 6-inches diameter
BulletPoint4 : 9000 RPM maximum rotational speed
BulletPoint5 : Made in the USA
Color : Multicolor
CompatibleMaterial : Carbon Steel
Configuration : Refer to description
ExternallyAssignedProductIdentifier1 : 697986824784
ExternallyAssignedProductIdentifier2 : 0697986824784
ExternallyAssignedProductIdentifier3 : 00697986824784
HandOrientation : Refer to description
IncludedComponents : Refer to description
ItemDisplayDimensions_Depth : 1.57 inches
ItemDisplayDimensions_Diameter : 3.94 inches
ItemDisplayDimensions_Height : 1.57 inches
ItemDisplayDimensions_Length : 3.94 inches
ItemDisplayDimensions_Width : 1.57 inches
ItemName : PFERD 82478P Full Cable Twist Knot Wheel Brush, Carbon Steel Wire, 6" Diameter, 5/8-11 Thread, 0.023 Wire Size, 1-1/4" Trim Length, 1/2" Face Width, 9000 RPM
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : abrasive-wheel-brushes
Manufacturer : PFERD Inc. -
Material : Carbon Steel
Material1 : Acrylonitrile Butadiene Styrene
Material2 : Rubber
Material3 : Plastic
Material4 : Polyethylene Terephthalate Glycol
Material5 : Polylactic Acid
ModelName : DISPRA-MK3NG46DPR12MT2Q3NT8
ModelNumber : 82478P
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 82478P
Pattern : Refer to description
ProductDescription : Feature:
Very Useful 3D Printer Part and Accessories, extend your nozzle’s and hot-end’s useful life.
The anti-static filament cleaner wipes lint, dust, or other dirt before the filament enters your printer's valuable extruder and nozzle. It can be used with Direct-Drive and Bowden Extruders, dust, hair, small plastic, or other material shavings are wiped off the surface of the filament, extend your nozzle's and hot-end's useful life.
Special Design: The filament cleaner blocks are made from crack resistant rubber foam material. It conveniently slips over standard 1.75, 3.0mm diameter ABS, PLA or other 3D printing filaments.
1. As most filaments are made from plastics, they are often statically charged and attract all sorts of debris from around your filament storage or work space.
2. As most consumer grade 3D printers use an open Spool design, it is important to address this issue.
3. As hot-ends, extruders and nozzles are getting more and more sophisticated and monolithic, repair or replacement is costly and also can incur quite some printer down-time.
4. How it works: the anti-static filament cleaner wipes lint, dust, or other dirt before the filament enters your printer’s valuable extruder and nozzle.
5. Has two guides for both 1.75mm and 3mm filaments.

3 x 1.75mm Filament Cleaners
3 x 2.85/3.0mm Filament Cleaners
1 x Storage Box
ProductSiteLaunchDate : 2017-12-22T08:00:01.000Z
Size : Refer to description
StreetDate : 2017-12-22T00:00:01Z
Style : 22mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1