Cart 2 india

Specification
Brand : DAYUAN
BulletPoint1 : 【APPLICATION】The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles; easily replaces wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle.This eliminates the need for front end alignment after finish the wheel bearing replacement work.
BulletPoint2 : 【COMPATIBLITY】: Suitable for most front wheel drive cars, light trucks and vans.
BulletPoint3 : 【Drift Size】: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32" (55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm)
BulletPoint4 : 【MATERIAL】:The Front Wheel Bearing Removal Kit is made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
BulletPoint5 : 【PORTABILITY】: Comes with a durable storage case, convenient to collect the tools and transport.
Color : Blue
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 788537801887
ExternallyAssignedProductIdentifier2 : 0788537801887
FitType : Universal
IncludedComponents : spreader
ItemDisplayDimensions_Height : 1.18 inches
ItemDisplayDimensions_Length : 2.17 inches
ItemDisplayDimensions_Width : 1.57 inches
ItemDisplayWeight : 0.65 pounds
ItemName : DAYUAN 19pcs Front Wheel Drive Bearing Removal Installation Service Tool Kit FWD Bearing Install Master Set Wheel Bearing Removal Kit
ItemPackageDimensions_Height : 37.1 centimeters
ItemPackageDimensions_Length : 9.4 centimeters
ItemPackageDimensions_Width : 32.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mechanics-tool-sets
Manufacturer : Yinyuan Tools
Material : alloy steel
ModelNumber : YT-98010
PackageLevel : unit
PartNumber : YT-98010
ProductDescription :

Universal 19 pieces hub & bearing puller

Comprehensive set for the removal and installation of front hub bearings

No dismantle of steering assembly needed

Heavy duty steel drifts

Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.

PACKAGE INCLUDES:

1 x Steel Drifts: 38mm;

2 x Drift: 86mm, 91mm;

1 x Receiver Sleeve: 76mm;

3 x Hub Screw: M12 x 1.5 mm;

3 x Hub Screw: M14 x 1.5 mm;

9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm.

Operation as reference:

1. Please check if the vehicle has a trapped rotor or a floating rotor.

2 .Assemble the tool components,then press out the worn bearing.

3. Lightly oil the new bearing and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.

4. Fasten the bearing retainer in right place by using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)

5. Assemble the tool components. Lightly lubricate the hub assembly, and install the hub.

Noted​: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.

6. Assemble the remaining vehicle components that were removed for replaces the bearing:

1) lower ball joint to steering knuckle assembly brake rotor.

2) disc brake caliper.

3) outer tie rod nut and tie rod.

4) axle nut.

5) front tires.

If there is any quality problem about the product, please kinldy cntact us.

ProductSiteLaunchDate : 2025-04-14T01:51:25.390Z
Size : 5.50X4.00X3.00CM
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000