Cart 2 india

Specification
AutoPartPosition : center
Brand : Atesilor
BulletPoint1 : Universal Compatiblity: Wheel fitment offset mearsuring tool compatible with All 4 and 5 lug hubs,fit for all Wheels from 13 to 20 inches.the Wheel width is from 7 to 13 inches and the Wheel offset is from -40mm to +40mm
BulletPoint2 : Upgraded Material:Compared to other POM plastic circular bases wheel fitment tool,our wheel fitment tool have been upgraded and all the tool components adopted with aluminum alloy materials,which it is more sturdy, rust proof and heat-resistant,but it won't be bulky, it is easy to carry and service a longer life
BulletPoint3 : More Precise Laser Scale Values： The wheel alignment kit scale is marked with laser marking, which can meet your measurement needs with precision down to millimeters, help you record and adjust the wheel data values more convenient.The silver laser scale font is clearer on the black bracket surface, making it easier to recognize and read scale data
BulletPoint4 : Usage Tutorial: Wheel alignment tool can help to get proper offset for your wheel setup. What you need to do is just attach the tool base to your wheel hub, and then set values including the wheel height, width and offset, make sure where and how to make wheel fit with the fender according to the tool red line shows
BulletPoint5 : Assist in Assembling Allen Wrenches Sets: Our wheel fitting offset tool is additionally equipped with 8PCS Allen Wrenches Sets of different sizes. When installing, refer to the assembly diagram in the link or watch the assembly video. Use allen wrenches of the corresponding size to install screws, which can achieve easy and fast assembly. Our allen wrenches sets can also be used for other suitable screw installation work in daily life, helping you save time
Color : Black
ExternallyAssignedProductIdentifier : 00850043071181
FitType : Vehicle Specific Fit
ImportDesignation : Made in the USA
IncludedComponents : a set of wheel fitment offset tool
IsAssemblyRequired : 1
ItemName : Atesilor Wheel Fitment Tool,Wheel Alignment Tool with 8pcs Allen Wrenches Sets, 13-20' Car Wheel Measuring Gauge Hub Tool Sets, Upgraded Aluminum Alloy Materialand More Precise ET Values
ItemPackageDimensions_Height : 21.8948 centimeters
ItemPackageDimensions_Length : 2.3114 centimeters
ItemPackageDimensions_Width : 21.209 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : automotive-wheel-alignment-tools
Manufacturer : Atesilor
Material : Aluminum
ModelName : Wheel Fitment Tool
ModelNumber : Universal Wheel Fitment Tool
NumberOfItems : 1
PartNumber : universal wheel alignment tool
Pattern : Solid
ProductDescription :
Wheel Fitment Tool Package List:
Aluminum bracket x6 (see the picture shown）
Aluminum round base x1
M5*12*0.8 steel screws x4
M5*3*0.5 steel screw x3
M3*16*0.5 steel screws x2
M3*13*0.5 steel screw x1
Allen Wrenches Sets x1
Wheel Alignment Tool Installation tips
For best results in seeing how a wheel will fit when your suspension is preloaded. Before jacking up your car, measure the distance between the ground and your lower control arm.
after jacking up your car, taking the wheel off, attaching the tool, and setting your sizes. Lower the car back down but with some wood under that hub until the lower control arm is at the same height as the car sat previously. This will show you where the outer lip of a wheel would sit in relation to the fender when the car is at ride height.

Please take into account things such as inner wheel well clearance with the tires, brake rotor and caliper clearance, suspension clearance, etc. Wheel diameter is measured by wheel face where the tire seats on the wheel, not including the outer lip. Wheel width is measured by the width between the inside of the wheel lips that retain the tire. The outside location of the lip can be varied by the height and thickness of the lip.
ProductSiteLaunchDate : 2024-10-30T03:09:28.498Z
Size : 16oz
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : 6 months