Cart 2 india

Specification
Brand : Weatlake
BulletPoint1 : The easy-to-melt welding rods are high-quality special rods that are mainly used for welding / brazing aluminum and aluminum alloys. However, they can also be used for hard welding non-ferrous metals other than stainless steel.
BulletPoint2 : Recommended for welding aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
BulletPoint3 : Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.
BulletPoint4 : Prepared for small repairs. For repairs that would compromise safety if they are not repaired, we recommend replacing the parts completely instead of repairing them.
BulletPoint5 : Good crack resistance, small splash, beautiful molding
Color : Silver
CustomerPackageType : 1
ExternallyAssignedProductIdentifier : 6971115504230
ExternallyAssignedProductIdentifier1 : 0791523130885
ExternallyAssignedProductIdentifier2 : 791523130885
ExternallyAssignedProductIdentifier3 : 0716352144032
ExternallyAssignedProductIdentifier4 : 0607872515382
ExternallyAssignedProductIdentifier5 : 00716352144032
FinishType : Polished
IncludedComponents : MIG Wire
ItemDisplayWeight : 2 pounds
ItemForm : Coil
ItemName : Yocartgo Solution Welding Flux-Cored Rods-10PCS
ItemPackageDimensions_Height : 10.9 centimeters
ItemPackageDimensions_Length : 4.9 centimeters
ItemPackageDimensions_Width : 10.8 centimeters
ItemPackageQuantity : 1
ItemShape : Round Rod
ItemTypeKeyword : welding-wire
Manufacturer : Weatlake
Material : stainless steel
ModelName : MIG/1K/SS08
ModelNumber : MIG/1K/SS08
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : HS-2932-93HDJ
PowerSourceType : dc
ProductDescription :

Specifications:

Material: aluminum, magnesium

Melting temperature: <480 ° C (896 ° F)

No leakage of gases or toxins, no lead material included.

Excellent corrosion resistance

Minimize the distortion of the starting material during welding.

Size: 50cm x 1.6mm. ( According to the manual measurement, there may be a subtle deviation. )

1. Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny.

2. Then evenly heat the area to be welded.

3. As you heat, rub the rod vigorously against the heated area until the rod starts flowing.

Caution: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds.

10 pcs Welding Rods

ProductSiteLaunchDate : 2020-10-21T14:47:56.507Z
RecommendedUsesForProduct : Welding 304 and 308L stainless steel
Size : 4.25X4.13X2.01 in
Style : German
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1