Cart 2 india

Specification
Brand : DOKUYIE
BulletPoint : Universal Welding Rods Low Temp Easy Copper Steel Iron-Aluminum Melt Cored Wire
BulletPoint1 : It can be used in many kinds of heat sources, such as propane, oxyacetylene and so on
BulletPoint2 : Can be stored for a long time
BulletPoint3 : Great Welding Effect
BulletPoint4 : No Need Solder Powder
BulletPoint5 : You can use it to work on stainless. Also used for welding Matter for aluminum, connection with aluminum bus and guide rod of electrolytic aluminum plant, chemistry, food, and so on.
Color : Silver
ExternallyAssignedProductIdentifier : 7643260028112
ExternallyAssignedProductIdentifier1 : 0621572482300
ExternallyAssignedProductIdentifier2 : 621572482300
ItemName : 20 Pieces 2.0mm x 500mm Aluminum Low Temperature Welding Rod Aluminum Welding Wire Flux Cored Wire (No Case Included) DOKU-338-1811
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 28 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : welding-wire
Manufacturer : SHANG HAI XIANG SHANG SHANG MAO YOU XIAN GONG SI
Material : Steel
ModelName : DOK-338-1811
ModelNumber : DOKU-338-1811
NumberOfItems : 1
PartNumber : QIXIAMO
PowerSourceType : ac
ProductDescription : Specifications: 2.0mm thick Each 50 cm long

Instructions for use of low temperature aluminum welding wire
One step: sand the surface by physical cleaning.
Two steps: heating the surface of the base material at the weld until the temperature reaches the working temperature of the wire 380 °C-400 °C, so that the weld can be formed by the heat conduction welding wire of the base metal, avoiding the use of flame welding wire, and only the mother When the surface temperature of the material is sufficient, the wire can flow and penetrate into the metal capillary well.
Three steps:
When repairing relatively thin aluminum, the aluminum base material is heated to a suitable working temperature, and then the wire is frictionally melted back and forth to form a weld. Only the metal brush is used to fill the weld to form a weld.

Operation attention detail
1. The surface of the base metal must be cleaned. Clear welding
2. The temperature of the base metal should reach 400 °C, including the temperature of the base metal during the welding process should also be maintained at 400 ° C, and the temperature can be high or low.
3, taboo with flame deliberately to burn the wire, after the base metal temperature reaches 400 ° C, the wire will naturally rely on the base material heat conduction melting.

Precautions:
The bigger and thicker the piece, the more troublesome it is to heat up, so using a reasonable heat source is critical, as long as the surface temperature of the base metal reaches the wire.
At the working temperature, welding can be carried out. When using oxyacetylene welding, neutral flame welding is used, but do not use fire welding wire directly.
Applicable heat source: It can be used in many kinds of heat sources, such as propane, oxyacetylene and so on.
Storage: placed in a ventilated and dry place, can be stored for a long time

ProductSiteLaunchDate : 2024-07-23T07:20:32.470Z
Size : 78mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 20