Cart 2 india

Specification
Brand : DYRABREST
BulletPoint1 : ★[CONVINIENT WELDING TOOL KIT]: Easy to carry. Comes with tool accessory kit and tool box . Including spare silicone pressure roller+ fuse+ heating plate+ special hexagon screwdriver.
BulletPoint2 : ★[32~842°F HIGH TEMPERATURE RESISTANCE]: Premium silicone pressure roller features tightly pressed, high temperature resistance, and good elasticity, suitable for welding 0.2-1.5mm materials.
BulletPoint3 : ★[INTELLIGENT CONTROL BOX]: Automatic climbing welding. Feedback type intelligent control system, realizes precise control and provide longer service life. Strictly tested before leaving the factory.
BulletPoint4 : ★[800W HIGH POWER]: Special alloy wedge knife supporting high-power heating tube (800w), provide evenly and fast heating, high efficiency and long lasting working performance.
BulletPoint5 : ★[APPLY TO]: Widely used in highways, tunnels, bridges, reservoirs, buildings, artificial lakes, swimming pools, breeding ponds, landfills. Suitable for sealing and welding PVC EVA PE HDPE PP material.
Color : blue
FinishType : Chrome
ItemName : Geomembrane Welding Machine High Powerful Plastic Membrane 32~842°F Hot Wedge Welder Tool Kit for Sealing Welding PVC EVA PE HDPE PP Film Welding Machine Plastic Welder Silica Roller
ItemPackageDimensions_Height : 50 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 50 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-welders
Manufacturer : DYRABREST
ModelNumber : OT-MLLCR-3012-US-1-SCT
NumberOfItems : 1
PartNumber : OT-MLLCR-3012-US-1-SCT
ProductDescription : Specifications:
Lap Width: 3.93inches(=10cm)
Voltage: 110V 60Hz, 800W
Welding Material Thickness: Rubber Wheel 0.2-1.5mm
Welding Seam Width: Two 0.49in(=12.5mm), Inspection Seam 0.47in(=12mm)
Welding Strength: 85% Base Material (Tensile Resistance In Shear Direction)
Welding Speed: 0.5-5m/Min
Product Size: 12.20*5.51*8.26inch
Temperature: 32~842°F
Insulation Class: Class Ii
Power Fuse: 4A
Motor Fuse: 1A
Scope Of Application: Suitable For Pe, Pvc, Hdpe, Eva, Pp

Operating Procedures:
1. The Joystick Is Leveled To Separate The Upper And Lower Pressure Rollers To Prevent The Pressure Roller From Idling And Damaging The Machine After Starting The Machine.
2. Turn On The Power And Turn On The Power Switch.
3. Set The Temperature First. For Materials Above 1mm, The Temperature Is Adjusted To About 350 Degrees. When The Indicator Light On The Control Box Is Red, It Is Heating.
4. Adjust The Welding Speed According To The Thickness Of The Material. According To The Normal 1mm Material, The Speed Is Adjusted To About 2.5m.
5. When The Red Light Of The Control Box Turns To Green, Put The Materials In From The Left And Right Sides Of The Machine, And The Joystick Is Driven From Bottom To Top, And It Is 90 Degrees To The Ground.

 

Package Including
Climbing Welding Machine + Tool Kit + Tool Box + Manual
ProductSiteLaunchDate : 2021-09-04T06:18:34.178Z
Size : default
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23271800