Cart 2 india

Specification
Brand : Buckeye
BulletPoint : 10 Pack 3/8-16 Spot Weld Nuts - Double Tab - ND 3324
BulletPoint1 : Specification: Thread Size: M6-1mm; Thread Type: UNC; Width: 10mm/0.39"; Height: 5.5"; Material: Carbon steel; Grade: 4.8.
BulletPoint2 : Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection.
BulletPoint3 : Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints.
BulletPoint4 : Package Content: 20 Pcs x Square Weld Nut
BulletPoint5 : Advantages: Flat solder joints, steel, good weldability, thread size accuracy.
Color : Silver
DriveSystem : Slotted
ExteriorFinish : Aluminum
ExternallyAssignedProductIdentifier1 : 0023632267931
ExternallyAssignedProductIdentifier2 : 023632267931
FinishType : Plain Finish
GradeRating : Industrial
ItemName : 10 Pack 3/8-16 Spot Weld Nuts - Double Tab - ND 3324
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : weld-nuts
Manufacturer : Unknown
Material : C1010 High-Welding Quality, Low Carbon Steel
MetalType : Carbon Steel
MetalType1 : Aluminum
MetalType2 : Carbon Steel
NumberOfItems : 1
NumberOfPieces : 10
PartNumber : Unknown
ProductDescription :

This listing is for ten pieces. The ND weld nut is a dual-tab spot weld nut for applications requiring additional strength where tension is against the weld. Established as the standard slot fastener in the aluminum extrusion industry (economy t nut). The location of the twin-tabs enables the ND to be used in bridging corners and recessed areas. A precision pilot speeds location and provides a full thread engagement. The ND can use the same electrodes, equipment and settings used in production, thus eliminating setup and changeover time, thereby lowering in-place-fastener cost. Thread Size 3/8-16 Width (in) 5/8 Thickness (in) 9/64 Length (in) 1-1/2 Hole In Sheet (in) 0.438 Material C1010 High-Welding Quality, Low Carbon Steel Plain Finish Threads Unified Standard Class 2B ASME B 1.1-2003

ProductSiteLaunchDate : 2018-12-31T08:00:00.000Z
Size : M6
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161700