Cart 2 india

Specification
Brand : Northeast Fasteners
BulletPoint1 : 1/2 inch x 2 3/4 inch Zinc Concrete Wedge Anchors - 25 pieces
BulletPoint2 : Used for concrete applications
BulletPoint3 : Clip is created with enlarged dimples to reduce slip and increase effectiveness in lighter concrete
BulletPoint4 : Less rotation is needed to achieve the required torque
BulletPoint5 : Designed to spread surface pressure throughout the anchor to distribute weight
Color : Silver
ExteriorFinish : Plated
ExternallyAssignedProductIdentifier1 : 0609053914670
ExternallyAssignedProductIdentifier2 : 609053914670
ExternallyAssignedProductIdentifier3 : 0044315646416
ExternallyAssignedProductIdentifier4 : 0044315646409
ExternallyAssignedProductIdentifier5 : 00044315646416
GradeRating : Grade 8
ItemHardness : B70 (Rockwell B)
ItemName : NEF Concrete Wedge Anchor, 1/2 Inch X 2 3/4 Inch, Zinc, Qty (25)
ItemPackageDimensions_Height : 10.668 centimeters
ItemPackageDimensions_Length : 9.906 centimeters
ItemPackageDimensions_Width : 29.21 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : wedge-anchors
Manufacturer : Northeast Fasteners, Inc.
ManufacturerGrade : Grade 2
Material : concrete
Material1 : Alloy Steel
Material2 : zinc plated
MetalType : Carbon Steel
ModelNumber : WA12234
NumberOfItems : 1
NumberOfPieces : 20
PartNumber : WA12234
ProductDescription : 1/2 inch x 2 3/4 inch Zinc Concrete Wedge Anchors are used for concrete applications. The clip is created with enlarged dimples to reduce slip and increase effectiveness in lighter concrete. Less rotation is needed to achieve the required torque. A "safety shoulder" feature supports the clip when anchor is under strain, minimizing bolt-end collapse and slipping of the clip under extreme loading conditions. Designed to spread surface pressure throughout the anchor to distribute weight and provide greater carrying capacity. Installation Instructions: 1) Drill the hole, in which diameter equals the anchor diameter perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble. 2) Drill the hole deeper than the intended embedment, but not closer than two diameters to the bottom (opposite) surface of the concrete. 3) A clean hole is necessary for proper performance. Clean the hole using a nylon brush and compressed air. 4) Assemble the nut and washer so that the top of the nut is flush with the top of the anchor. Drive the anchor through the material to be fastened so the the nut and washer are flush with the surface of the material. 5) Tighten the nut, or head, 3 to 5 turns past the hand tight position. Installing the anchor with a torque wrench is recommended for optimum performance.
ProductSiteLaunchDate : 2013-10-18T18:29:45.857Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 20
UnspscCode : 31161500