Cart 2 india

Specification
Brand : Oceanic Water Systems
BulletPoint1 : 1 softener 9X48 tank 10% crosslink resin
BulletPoint2 : 1 fleck control meter digital valve
BulletPoint3 : 1 brine tank (note the tank could be round or square)
BulletPoint4 : 1 9X48" mineral tank with coconut shell carbon
BulletPoint5 : 1 up flow valve set with bypass and adapter.
BulletPoint6 : Efficient and Low Maintenance: The system features a patented piston that keeps the oxidation process inside one tank, reducing maintenance costs and downtime. The system creates a bubble of pressurized air at the top of the tank during the backwash cycle, oxidizing the impurities and trapping them in the media.
BulletPoint7 : Model# WWH5600AIO1252. For larger sized systems and our Installation Manual, please visit OCEANICWATER. COM
Capacity : 1 cubic_feet
Color : Black
ExternallyAssignedProductIdentifier1 : 818368016911
ExternallyAssignedProductIdentifier2 : 0818368016911
ExternallyAssignedProductIdentifier3 : 00818368016911
IncludedComponents : upflow carbon and water softener
InstallationType : professional
ItemName : Oceanic Water Systems Whole House Fleck Water Softener + Upflow Carbon Filtration System (9"x48", 32,000 Grain, 1 Cubic Ft)
ItemPackageDimensions_Height : 50 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : water-softeners
Manufacturer : Oceanic Water Systems
Material : Resin
MaximumFlowRate : 8 gallons_per_minute
ModelName : Upflow Carbon
ModelNumber : 32k-56sxt-10-GFCRB10
NumberOfItems : 1
PartNumber : 32k-56sxt-10-GFCRB10
PowerSourceType : Adapter
ProductDescription :

Iron, sulfur, manganese all cause staining and odor issues. All of these problems can be eliminated with Oceanic Water System's Air Injection System (AIO). 

Using the principle of oxidation the system forces the contaminates into contact with oxygen. Most older air injection systems consist of either two separate tanks or by using a Venturi valve to inject air into the water. cleaned and/or replaced. By utilizing a patented piston our Air Injection system is able to put the whole oxidation process inside one tank keeping maintenance costs and down time to a minimum. This is done by creating a bubble of pressurized air at the top of the tank (done during the backwash cycle). The air in the tank then oxidized the contaminates with the media trapping them. Then every few days the system automatically backwashes itself rinsing the contaminates off of the media and replenishing the air bubble. 

This system is chemical free and is able to remove higher contaminate levels than most other tank systems on the market. Using an iron trapping media combined with air injection you remove the most iron sulfur and manganese problems without worrying about dangerous chemicals. 

Complete system includes: 

12" x 52" FRP Tank

Distributor/Riser Tube (pre-installed)

Control Valve;

1.5 cubic ft Media (Pre-filled for easy installation)

1" Yoke Connection (Can request ¾" by messaging or calling us at 661-575-0033)

- Service Rate: up to 9 GPM

- Peak Flow Rate (<10 minutes): 15 GPM

- Backwash Flow Rate (min required): 10 GPM

ProductSiteLaunchDate : 2018-01-18T08:00:00.000Z
PurificationMethod : Ultra Filtration
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 48101700