Cart 2 india

Specification
Brand : FireHoseDirect
BulletPoint : Water Discharge Hose | 4" x 100 FT | Camlocks | Red | Industrial Supply
BulletPoint1 : Hose Size - 1 1/2 inches
BulletPoint2 : Hose Length - 50 feet
BulletPoint3 : Male Coupling - Aluminum 1 1/2 inch Straight Pipe Thread (NPSH)
BulletPoint4 : Female Coupling - Brass 1 1/2 inch Straight Pipe Thread (NPSH) with Gasket
BulletPoint5 : The Female Coupling Will Only Connect To A Male 1 1/2 inch NPT PVC Pipe, Pool Pump or Metal Pipe
Color : White
ExternallyAssignedProductIdentifier1 : 725559149917
ExternallyAssignedProductIdentifier2 : 0725559149917
ExternallyAssignedProductIdentifier3 : 00725559149917
IncludedComponents : 1 hose
ItemName : 1 1/2" x 50' Pool Pump Water Hose - Backwash Filter Discharge Drain Hose - Lay Flat Trash Pump Rubber Hose
ItemPackageDimensions_Height : 16 inches
ItemPackageDimensions_Length : 15 inches
ItemPackageDimensions_Width : 15 inches
ItemPackageQuantity : 1
ItemTypeKeyword : water-hoses
Manufacturer : FireHoseDirect
Material : Pvc,Aluminum,Polyester,Metal,Rubber,Brass
MaximumPressure : 150 pounds_per_square_inch
ModelNumber : 98109016
NumberOfItems : 1
PartNumber : 15S1550MF
ProductDescription :

• Maximum Pressure - 150 psi
• Weight per Foot - 0.21 pounds
• Type of Use - Water
• Hose Type - Single Jacket Mill Hose
• Hose Jacket Color - White
• 100% All Polyester

Our single jacket mill hose is for light industrial and construction locations where medium water pressure is used. Not intended for structural firefighting.

3" Male Coupling

• Inside diameter of a male adapter - 3" inches
• Outside diameter a male NPSH or NPT hose coupling - 3.47 inches (8 Threads per inch)

NPSH Threads

Hoses with National Pipe Straight Hose Thread (NPSH or NPS) has the same threads per inch (TPI) as National Pipe Thread (NPT) but the threads do not taper. This allows a female coupling to thread onto a NPT fitting without being a permanent connection. For example, a female hose coupling with NPSH threads will only connect to a PVC pipe, metal pipe or couplings with NPSH or NPT threads. Fittings that are connected together by NPT by NPT require a sealing agent like pipe cement or teflon tape because the threads are making the seal and a permanent connection. When a female NPSH is threaded onto a male NPT fitting, it allows this connection to thread on and off frequently by using a gasket to seal.

The male side with NPSH threads will only connect to fittings, nozzles or hoses with NPSH threads. It will NOT thread into a NPT female. For example, a male hose coupling with NPSH threads will require a nozzle with NPSH threads.

We are a firefighter owned and operated company since 2011.

WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

ProductSiteLaunchDate : 2021-01-12T19:31:23.278Z
Size : 1/4" Diameter x 150'
UnitCount : 1
UnspscCode : 40142000