Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!Specifications:Tube Compatibility: 1/2in. ID x 5/8 in. OD (12mm ID x 16mm OD or 13mm ID x 16mm OD)Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)
Features
1) Works w/ 1/2in. ID Tubing
2) Small tool easily stored
3) Designed to Fit Standard Drills
4) Sealed Bearings That Allow for Scuff-Free Spinning
Specification
Binding : Personal Computers
Brand : PrimoChill
Label : PrimoChill
Manufacturer : PrimoChill
Model : RT58-TOOL
PackageDimensions_Weight : 0.05 pounds
PackageDimensions : L:2.09 X W:0.98 X H:0.98
ProductGroup : PC Accessory
ProductTypeName : COMPUTER_COOLING_DEVICE
Publisher : PrimoChill
Studio : PrimoChill
Title : PrimoChill RFB Rigid Tubing Finishing Bit - 1/2in. ID x 5/8 in. OD
Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!Specifications:Tube Compatibility: 1/2in. ID x 5/8 in. OD (12mm ID x 16mm OD or 13mm ID x 16mm OD)Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)
Features
1) Works w/ 1/2in. ID Tubing
2) Small tool easily stored
3) Designed to Fit Standard Drills
4) Sealed Bearings That Allow for Scuff-Free Spinning
Specification
Binding : Personal Computers
Brand : PrimoChill
Label : PrimoChill
Manufacturer : PrimoChill
Model : RT58-TOOL
PackageDimensions_Weight : 0.05 pounds
PackageDimensions : L:2.09 X W:0.98 X H:0.98
ProductGroup : PC Accessory
ProductTypeName : COMPUTER_COOLING_DEVICE
Publisher : PrimoChill
Studio : PrimoChill
Title : PrimoChill RFB Rigid Tubing Finishing Bit - 1/2in. ID x 5/8 in. OD
