Cart 2 india

Specification
AirFlowCapacity : 70.84 cubic_feet_per_minute
Brand : Odestar
BulletPoint1 : EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90 Degree - Acrylic is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle
BulletPoint2 : Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems
BulletPoint3 : Comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run
BulletPoint4 : Tubing length of 250mm and 550mm on either side of the bend
BulletPoint5 : Material: Extruded acrylic
BulletPoint6 : [Wide compatibility] The cooler supports AMD: AM4/AM5,Intel: LGA1150/1151/1155/1156/1200/2011/2066/1700/1851,each platform comes with a corresponding mounting fastener, the installation steps are simple, and it can be installed well on the corresponding CPU platform, it is recommended to install it according to the installation video or manual. (Note: When installing the AMD platform, you need to use the original backplane of the motherboard)
Color : Titanium
CompatibleDevices : Desktop
CoolerHeatsinkCompatibility : High-end systems, custom liquid cooling loops
CoolingMethod : Water
ExternallyAssignedProductIdentifier : 3831109826065
ExternallyAssignedProductIdentifier1 : 0769047388624
ExternallyAssignedProductIdentifier2 : 769047388624
GpsrSafetyAttestation : 1
IncludedComponents : 1 product
ItemName : EKWB EK-Loop Hard Tube 16mm 0.8m Pre-Bent, 90 Degree, Acrylic, 6-Pack
ItemPackageDimensions_Height : 69.215 centimeters
ItemPackageDimensions_Length : 3.175 centimeters
ItemPackageDimensions_Width : 38.735 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desktop-computer-water-cooling-systems
Manufacturer : EKWB
Material : Acrylic
MaximumRotationalSpeed : 2000 rpm
ModelNumber : 3831109826065
MountingType : Chassis Mount
NoiseLevel : 25 decibels
NumberOfBoxes : 1
NumberOfItems : 6
PackageLevel : unit
PartNumber : 3831109826065
PowerConnectorType : 4-Pin
ProductDescription : EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems. It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage. Technical data: - Material: Extruded acrylic - Inner diameter: 12 mm - Outer diameter: 16 mm - Total length: 800 mm - Bend Angle: 90° - Bend Radius: R30 - Length per axis: 550 x 250mm Model: 3831109826065
ProductSiteLaunchDate : 2021-07-07T23:52:38.133Z
Size : 70mm
StreetDate : 2023-11-08T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 6
UnspscCode : 43200000
Voltage : 12 volts
Wattage : 108 watts