Cart 2 india

Specification
Brand : Bykski
BulletPoint1 : ENGINEERED FOR PERFORMANCE: We all know that the GPU is the hottest running component in any personal computer, and properly cooling it is Bykski's #1 priority. The water-cooling block absorbs and exchanges heat quickly, enabling the coolest temps and highest performance vs. any air-cooled graphic card PERIOD.
BulletPoint2 : SIMPLE INSTALL: Full coverage GPU block with straightforward installation allowing you to get up and running quickly. The block is designed to be compatible with Sapphire Radeon RX 7900 XTX Nitro+ and Sapphire Radeon RX 7900 XT Pulse. Use with other video cards is not recommended.
BulletPoint3 : HIGH-QUALITY DESIGN: Full acrylic (PMMA) and Ultra-high purity purple copper plate, which is the highest quality in these characteristics next to silver. Includes GPU block with backplate and all the mounting hardware, thermal paste/pads, and installed A-RGB (RBW) 5v LED Strip. Everything needed for installation is included with your block no need to pick up extra parts to get cooling your GPU.
BulletPoint4 : INDUSTRY STANDARD MATERIALS: Knowing that your block will work with your other water-cooling parts is paramount, so we make our parts with industry-standard materials and threads, so it's right every time. The performance will vary based on the cooling loop layout and cooling capacity installed along with the GPU block.
BulletPoint5 : USA SUPPORT FRIENDLY; EXPERIENCED: Choose Tyler Direct for cheerful, seasoned American customer service for problem-solving or compatibility concerns. Backed by FULL 1-YEAR WARRANTY against any manufacture defects. Tyler Direct ships with lightning speed from Boise, Idaho, in the United States, so don't wait for your parts via the slow freight from China.
CompatibleDevices : Graphic Cards
CoolingMethod : Water
ExternallyAssignedProductIdentifier1 : 743623843424
ExternallyAssignedProductIdentifier2 : 0743623843424
ItemName : Bykski Full Coverage GPU Water Block and Backplate for Sapphire Radeon RX 7900 XTX Nitro+ (A-SP7900XTX-X)
ItemPackageDimensions_Height : 23.05 millimeters
ItemPackageDimensions_Length : 267.7 millimeters
ItemPackageDimensions_Width : 117.15 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desktop-computer-water-cooling-systems
Manufacturer : Bykski
Material : Nickel Electroplated High Purity Copper, Acrylic, Black Anodized Aluminum
ModelNumber : CUU-CY3-GSGJ0100-pXDku7m4
NumberOfItems : 1
PartNumber : A-SP7900XTX-X
PowerConnectorType : PCIe
ProductDescription : This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.SpecificationsBlock Material: Nickel Electroplated High Purity Copper / AcrylicBackplate Material: Black Anodized Aluminum (not in contact with coolant)Compatibility(Including but not limited to the following models)Compatible with Sapphire Radeon RX 7900 XTX Nitro+ andSapphire Radeon RX 7900 XT PulsePlease check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.Compatibility based on these circuit board designs onlyFittings: G 1/4in. ThreadParts Included1x Full Coverage GPU Water Block1x Backplate2x Stop Fitting1x Mounting HardwareThermal grease1x 5v A-RGB (RBW) Light(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.WarningsThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact
ProductSiteLaunchDate : 2023-03-06T00:05:04.088Z
Size : Large
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43201400
Voltage : 5 volts