Cart 2 india

Specification
Brand : Alphacool
BulletPoint1 : High flow indicator used to determine flow rate in water cooling systems
BulletPoint2 : Includes 8 addressable Digital RGB LeDs around the circumference of the flow meter.
BulletPoint3 : Can display a water flow rate of 70 to 300L/h.
BulletPoint4 : L x W x H: 45 x 45 x 39.4 mm
BulletPoint5 : Material: Plexi
Color : Black
CompatibleDevices : Desktop
ConnectorType : Ring
CoolingMethod : Water
CoolingMethod1 : Water
CoolingMethod2 : Air
ExteriorFinish : Chrome
ExternallyAssignedProductIdentifier : 4250197174640
ExternallyAssignedProductIdentifier1 : 725983609476
ExternallyAssignedProductIdentifier2 : 0725983609476
GpsrSafetyAttestation : 1
ItemName : Alphacool Eisfluegel Aurora Flow Indicator HighFlow with RPM-Signal
ItemPackageDimensions_Height : 10.4902 centimeters
ItemPackageDimensions_Length : 5.207 centimeters
ItemPackageDimensions_Width : 9.2964 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desktop-computer-water-cooling-systems
Manufacturer : Alphacool
Material : plexiglass
ModelName : Pacific G1/4" 90° Adapter - schwarz
ModelNumber : 17464
NumberOfItems : 1
NumberOfPieces : 4
PackageLevel : unit
PartNumber : 17464
PowerConnectorType : 2-Pin
ProductDescription :

For all those who like to measure their water flow and value a great look, the Alphacool Eisfluegel Aurora is the optimal choice. It can be easily installed anywhere in the water cooling system and offers outstanding lighting.

The Eisfluegel is designed for high flow systems and can display a water flow rate of 70 to 300L/h. The Eisfluegel is connected via the 3-pin header to a fan header on the mainboard. The flow rate can then be determined. Since the Eisfluegel is made of plexiglass, the flow can also seen visually.

The Eisfluegel has 8 addressable Digital RGB LEDs around the circumference of the flow meter. Since each LED can be controlled individually, all effects can be created by the controller. The connection is made via a 3-pin JST connector which makes the Eisfluegel compatible with all other Digital RGB products from Alphacool. If, however, you prefer to control directly via the mainboard, you can use the included 3-pin 5V adapter.

Two G1/4" threads are used to install the flow meter into the loop. Which one is used as IN or OUT is up to the user as it will work both ways. The Eisflügel flow sensor is lightweight and can therefore be freely suspended in the system. On the lower side of the Eisflügel there are two screwing possibilities for the enclosed M3 screws. This allows the flow sensor to be placed anywhere in the case if you wish to secure it. In the scope of supply there is also a self-adhesive small velcro mat which can also be used for the installation of the Eisfluegel.

Attention: To connect the flow sensor to the mainboard a separate 3-pin female to 3-pin female connection cable is required.

Technical data:
L x W x H: 45 x 45 x 39.4 mm
Material: Plexi
Threads: 2x G1/4"
Connection Digital RGB-LED: 3-Pin JST (Adapter to 3-Pin 5V included)
Connection flow rate sensor: 3-Pin fan connector

Model: 17464
ProductSiteLaunchDate : 2020-09-10T02:00:41.910Z
Size : 30 cm
StreetDate : 2018-09-21T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43211900
Voltage : 12 volts
WarrantyDescription : One year manufacturer
Wattage : 680 watts