Cart 2 india

Specification
AccessLocation : Top
Brand : HQHAOTWU
BulletPoint1 : FAST COOLING SPEED- The water chiller is with hermetic type water tank, water is available for a long time used. Fast cooling speed has good effect. Save time, effort, and electricity. And the main function of the water cooling system is water cycle, if you want refrigeration and cooling, we recommend #130058
BulletPoint2 : STRONG SAFETY PERFORMANCE- The industrial water cooling chiller is with specific disconnection alarm security protection function. Equipped with alarm output port to protect sensitive components quickly. High working efficiency and low failure rate
BulletPoint3 : WITH TEMPERATURE DISPLAY SCREEN- The thermolysis type industrial water cooling system is equipped with clear temperature display screen. Real-time temperature monitoring, accurate knowledge of heating devices working condition
BulletPoint4 : POWERFUL FAN ENGINE- Adopting professional air-cooled forced radiator with strong heat dissipating capacity and difficult to be blocked up. Fast operation speed, timely removal of heat. Effectively extend the service life of the water chiller machine
BulletPoint5 : CAUTION- It is strictly forbidden to plug and run the cooler without feeding water. Cooler should be placed in a well-ventilated, dry environment place and away from heat sources. Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides. The cooling water must be drained if the cooler is out of use for long time or before being moved
Capacity : 5 gallons
Color : Black
ExternallyAssignedProductIdentifier1 : 0198462111133
ExternallyAssignedProductIdentifier2 : 198462111133
IncludedComponents : 1 Set of Industrial Water Chiller for CNC/ Engraver
InstallationType : Countertop
ItemDisplayDimensions_Height : 44.13 inches
ItemDisplayDimensions_Width : 15.75 inches
ItemDisplayWeight : 10 pounds
ItemName : HQHAOTWU Industrial Water Chiller for CNC Engraver, 9L 50W/℃ Cooling System w/Flow Alarm Protection, 110V CW-3000DG Professional Water Cooler Cooling Machine (Air-Cooled, Temperature Control)
ItemPackageDimensions_Height : 18.9 inches
ItemPackageDimensions_Length : 22.44 inches
ItemPackageDimensions_Width : 14.37 inches
ItemPackageQuantity : 1
ItemTypeKeyword : water-coolers
LowerTemperatureRating : 8 degrees_celsius
Manufacturer : HQHAOTWU
Material : Stainless Steel
Material1 : Polypropylene (PP)
Material2 : Stainless Steel
ModelName : DX130114
ModelNumber : CW-3000DG
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfSettings : 3
PartNumber : DX130114
PowerSourceType : Corded Electric
ProductDescription :
Specifications:

MODEL: CW-3000DG

Voltage: AC100-120V

Frequence: 50/60HZ

Current: 0.9A

Cooling: 50W/℃

Capacity: 9L

Inlet and outlet hold: Outside dimensions 10mm brass connector

Max .Lift: 10M

Max.Flow: 10L/min

Protection: Flow alarm

N.W: 9.5Kg

G.W: 12Kg

Dimensions: 47*27*37cm (L*W*H)

Packing dimensions: 59*39*48cm (L*W*H)

Application:

CW-3000 Series is professional cooling machine referring to international,advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery.

Caution:

1. The main function of is water cycle,if you want refrigeration and cooling,we recommend #130058

2. To protect tubes , the radiator fan of cooler will suspend to work when water temperature is lower (about 10℃) , and it will restart to run when water temperature rises to higher (about 20℃).

The first Installation It is very simple to install this industrial cooling machine. The first time installation of the new machine can be carried out by following steps.

1. Open the package to check if the machine is intact and all the necessary accessories are completed.

2. Open the injection port, then add cooling water.

3. According to system conditions, connect the water inlet and outlet pipe well.

4. Plug in power, turn on the power switch. (Do not allow the water overflow)

5. Check the water level of the water tank again. (It should be 80-150cm from the surface of water to the injection port)

Item Included(130114):

1 Set of Industrial Water Chiller for CNC/ Engraver

ProductSiteLaunchDate : 2025-06-20T03:22:39.587Z
Style : Classic,Industrial
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 48101700
UpperTemperatureRating : 90 degrees_celsius
Wattage : 500 watts