Cart 2 india

Specification
Brand : Dixon
BulletPoint1 : High pressure spray nozzle
BulletPoint2 : Brass fitting
BulletPoint3 : 1/4" NPT male inlet
BulletPoint4 : 15 Degree spray angle
BulletPoint5 : Size 4
Color : With 2xCamlocks
ConnectorType : Npt Male Inlet
CustomerPackageType : Standard Packaging
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 704768843533
ExternallyAssignedProductIdentifier2 : 0704768843533
IncludedComponents : Forestry Fog Nozzle,1 In.,NPSH
ItemDisplayWeight : 0.04 pounds
ItemName : Dixon NZ1504 Brass High Pressure Spray Nozzle, 1/4" NPT Male Inlet, 15 Degree Angle
ItemPackageDimensions_Height : 1.27 centimeters
ItemPackageDimensions_Length : 10.16 centimeters
ItemPackageDimensions_Width : 17.78 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-hose-washdown-nozzles
Manufacturer : Dixon Valve & Coupling
Material : Brass
MaximumOperatingPressure : 600 pounds_per_square_inch
ModelNumber : NZ1504
NumberOfItems : 1
NumberOfPieces : 2
PackageLevel : unit
PartNumber : NZ1504
ProductDescription : Product Feature
Material - Plastic and Brass
Size - 2 inches
Threads – NPSH/NPT
Approximate Distance - 60 feet
Maximum operating pressure - 100psi
Approximate Gallons Per Minute (GPM) – 75
Positions - Fog, straight stream and off

NOTE: This nozzle will only connect to a 2" NPSH hose, not for NH/NST thread
◆NH / NST: The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread.
But NST or NH is more common these days. NH = NST.
◆NPSH: National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket
in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT
thread into a female metal or pvc pipe.
◆NPT: National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered
thread so that the outside diameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the
opposite tapers force thread friction and makes the seal without the use of a gasket.

ProductSiteLaunchDate : 2012-05-14T00:00:01-07:00
Size : 1/4" NPT male, 15 Degree Angle
SpecificationMet : nst
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1