Cart 2 india

Specification
Brand : 4SPRAY
BulletPoint1 : ✔️ EFFECTIVE MIXING AND AGITATION – Our British Standard Pipe Thread 4Spray tank mixing agitation nozzles are designed to convert high fluid input velocity into a low pressure zone that induces surrounding liquid in the tank to enter into the nozzle and recirculate, thus effectively mixing the tank contents
BulletPoint2 : ✔️ ECONOMICAL TO OPERATE – The amount of fluid that exits the nozzle is three to five times the amount of fluid that is pumped. This multiplier effect allows greater mixing efficiency while using smaller pumping capacity in open or closed tanks
BulletPoint3 : ✔️ MINIMAL MAINTENANCE & CLOG RESISTANT – 4Spray tank mixing agitation nozzles require minimal maintenance with proven results. With no moving parts, our eductors are inherently clog resistant for reducing required maintenance and maximizing flow
BulletPoint4 : ✔️ IMMEDIATE AND CONTINUOUS MIXING – Our eductor design allows the fresh feed to be supplied to the nozzle inlet rather than recycling it from the tank. This allows immediate mixing of the fresh feed with the contents of the tank, and then continuous mixing as the exit jet propagates downstream
BulletPoint5 : ✔️ PERFORMS IN TEMPERATURES UP TO 300° C – 4Spray’s 316 stainless steel tank mixing nozzles allow you to mix fluids with temperatures up to 300° C for high-heat and high-performance situations
Color : Yellow
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 00352763003294
ItemName : 4Spray Eductor Nozzle - BSPT Fluid Mixing Eductors - 316 Stainless Steel - Minimal Maintenance and Clog Resistant Tank Mixing Agitation Nozzles - 3/8 inch (2 Count)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-hose-washdown-nozzles
Manufacturer : Golden Touch LLC
Material : Stainless Steel
NumberOfItems : 2
PartNumber : Pilipaneyixb7er506-20
ProductDescription :

4Spray’s Eductor Tank Mixing Agitation Nozzles are designed to convert high input fluid velocity into low pressure recirculation for effective mixing and agitation. The amount of fluid that exits the nozzle is three to five times the amount of fluid pumped. Our nozzles require minimal maintenance and are inherently clog-resistant for immediate and continuous mixing at temperatures up to 300° C

What Do Eductor Tank Mixing Agitation Nozzles Do?

Tank mixing is necessary to keep contents and solutions thoroughly mixed, proper chemical/biological reactions, homogenization of products, sediment build-up prevention, proper draining/pumping, thermal stratification prevention and bacterial growth avoidance.

4Spray tank mixing nozzles greatly reduce the complexity, capital cost, and maintenance requirements of any system by utilizing a pump and submerged spray nozzles, in place of conventional mechanical components, to mix immiscible liquids or solids that need to be kept suspended.

Common Applications for Tank Mixing Nozzles

Waste water treatment plants

Oil and gas storage tanks

Drinking water holding tanks and reservoirs

Aerobic & anaerobic digesters

Homogenize tank contents when pumping/draining

Sweep sludge & sediment from tank bottoms

Blending ethanol and bio-diesel

Particulate/solid suspension

Transport tankers

Chemical injection/mixing

Acid/chemical storage tanks

Slurry mixing/holding tanks

Lake/river water inlets

Steam/air injection

Aquarium and Aquatic use

Plating tanks, Cleaning tanks

Phosphating tanks

E-coat tanks

Fertilizer tanks

Pulp tanks

Sludge tanks

Paint booths

Anodizing tanks

Cooling towers and decorative fountains

4Spray SS tank mixing nozzles are available in sizes from 1/4 inch to 1.5 inch.

ProductSiteLaunchDate : 2020-07-27T12:10:48.880Z
Size : 3/8"BSPT
Style : 2 Count
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 40141600
Voltage : 1 volts