Cart 2 india

Specification
Brand : Taidacent
BulletPoint : 1
BulletPoint1 : This module is a high-power high-frequency AC output module and can also be used for long-distance ignition module. The ignition distance is 30mm. It is designed with the newly developed high-voltage and high-power boost chip XKT-205IC. It has the characteristics of simple circuit, high output power, arbitrary adjustment of output voltage and high efficiency
BulletPoint2 : Module size: length 28mm width 20mm Power supply voltage: standard 24V (12~24V)
BulletPoint3 : Power supply current: greater than or equal to 2A Output voltage: 30KV discharge distance: 20mm~30mm
BulletPoint4 : For long-term use, it is better to adjust the discharge needle to about 25mm. Because the output voltage is too high, the output end will always discharge. If you don’t want it to discharge, just lower the input voltage. This module uses short-time pulse high-power output, but the average current is very small. The short-time power is about 150W. You can’t touch the discharge part with your hands.
Color : One Color
CurrentRating : 2 amps
Department : Unisex Adult
ExternallyAssignedProductIdentifier1 : 0738190906870
ExternallyAssignedProductIdentifier2 : 738190906870
IncludedComponents : 1PCS board
ItemName : Taidacent 30KV Pulse High Voltage Generator Trigger Transformer DC 12V 24V High Voltage Impulse Generator Power Supply Module
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : voltage-transducers
Manufacturer : Taidacent
Material : Copper
MinimumFrequency : 50 hertz
ModelName : SOBOUR
ModelNumber : TDJL-XKT203-57
MountingType : Flange Mount
NumberOfItems : 1
PartNumber : JLXKT203-57
ProductDescription : This module is a high-power high-frequency AC output module and can also be used for long-distance ignition module. The ignition distance is 30mm. It is designed with the newly developed high-voltage and high-power boost chip XKT-205IC. It has the characteristics of simple circuit, high output power, arbitrary adjustment of output voltage and high efficiency.
Ignition board parameters:
Module size: length 28mm width 20mm
Power supply voltage: standard 24V (12~24V)
Power supply current: greater than or equal to 2A
Output voltage: 30KV discharge distance: 20mm~30mm
For long-term use, it is better to adjust the discharge needle to about 25mm. Because the output voltage is too high, the output end will always discharge. If you don’t want it to discharge, just lower the input voltage. This module uses short-time pulse high-power output, but the average current is very small. The short-time power is about 150W. You can’t touch the discharge part with your hands.
ProductSiteLaunchDate : 2024-06-17T11:53:48.120Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 60141000