Cart 2 india

Specification
Brand : NutriEss
BulletPoint1 : Standards Conformance: Fully compliant with GB/T17215.321-2008 and IEC62053 requirements for grade 1 or level 2 single-phase energy meters, this device ensures authentic measurement of active energy consumption in fixed installations.
BulletPoint2 : Clear Digital Display: Featuring a high-quality LCD with 7+1 or 6+1 digit configurations, the meter immediately visualizes total power consumption for effortless monitoring in indoor fixed environments.
BulletPoint3 : Compact Installation: With its minimal footprint and light design, the energy meter easily mounts on a 35mm DIN standard guide rail, blending aesthetic appeal and practical efficiency in control panels.
BulletPoint4 : Electromagnetic Performance: Engineered with effective internal measures to deflect external electromagnetic disturbances, it operates with low power draw and robust overload capacity for consistent readings.
BulletPoint5 : Extended Lifespan: Incorporating safeguards against energy pilferage and operating reliably across temperatures from -25℃ to +55℃ (with up to 95% relative humidity), this meter is built for prolonged service.
ExternallyAssignedProductIdentifier : 5608063210227
IncludedComponents : No
ItemName : Nutriess Singlephase ElectricMeter 5-32A Digital LCD Din Rail Energy Meter Electronic KWh Meter for Residential
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : voltage-testers
Manufacturer : NutriEss
MeasurementAccuracy : 0.1mm
ModelName : NutriEss1k5tfe96r2
ModelNumber : NutriEss1k5tfe96r2
NumberOfItems : 1
PartNumber : NutriEss1k5tfe96r2
ProductDescription : Features:
The meter is fully in conformity with the relevant technical requirements of GB/T17215.321-2008 national standard and the IEC62053 international standard of grade 1 or level 2 single-phase energy meter, which can directly and accurately measure active energy of the energy consumption.
LCD display is 7+1 or 6+1meter shows the total power consumption.
It features high reliability, small volume, light weight, beautiful appearance, advanced technology, and 35mmDIN standard guide rail installation, etc.
It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti electricity-stolen and long life.
This table is suitable for the measurement of rated frequency 50 Hz or 60 Hz single-phase ac active electricity, used for fixed installation indoors, apply to the environment temperature is -25 ℃ ~ 55 ℃, relative humidity is 95%, and in the air does not contain corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc.

Specifications:
Model: DDS5188
Phase number: single phase
Type: guide type
Display mode: LCD
Rated voltage: 220V
Rated current: 5-32A
Working temperature: -25 ℃ ~ 55 ℃
Rated frequency: 50-60Hz +/- 10%
Accuracy level: level 1 (equivalent to measurement error < 1%)
Including S0 port 2000Imp/kWh (ti = 80ms)
Relative humidity: 95%
Size: as the picture
Weight:98g
Wiring diagram:

Test: The meter has photoelectric coupling type electric pulse test output port, located in terminal button box (as shown in figure 2), + 5 VDC of the test equipment connected to 20 + terminal, signal S connected to 21- terminal.

Package Included:
1 x Din-rail energy meter


ProductSiteLaunchDate : 2025-04-09T07:04:11.196Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111600