Cart 2 india

Specification
Brand : YWBL-WH
BulletPoint1 : Voltage Unbalance : Refers to a voltage imbalance that will affect the operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority.Three-phase voltage imbalance , static phase loss , reverse phase , lightning , and .
BulletPoint2 : Dynamic Phase Loss, Static Phase Loss : Refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.There is no requirement for motor wiring when used for motor .
BulletPoint3 : The function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W.
BulletPoint4 : Delay : When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release.
BulletPoint5 : Wrong Phase : A measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light.This product complies with GB/T 14048.1-2000, GB14048.5-2001 eqv IEC60947-1:1999.
Color : Green
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 746771504551
ExternallyAssignedProductIdentifier2 : 0746771504551
FinishType : Finish
IncludedComponents : inc
ItemName : TG30S 220-440V AC 3-Phase Sequence Relay Protector Voltage Phase Protective Relay
ItemPackageDimensions_Height : 9.9 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 6.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : voltage-monitoring-relays
Manufacturer : YWBL-WH
Material : plastic
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MeasurementType : Voltmeter
ModelNumber : YWBL-WH2tohe4gc9g
NumberOfItems : 5
OperationMode : Electrical
PartNumber : YWBL-WH2tohe4gc9g
PowerSourceType : PowerSource
ProductDescription : Specification:
Model: TG30S
Voltage: 220-440V AC
Meet the standard: GB/T 14048.1-2000, GB14048.5-2001 eqv IEC60947-1:199

Package list:
1 * Phase Sequence Protector

Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Working status:
1. L1, L2, L3 three-phase wiring is correct, the monitor green light is on, the relay is closed; if the phase sequence is wrong, the monitor yellow light is on, just exchange any two phases of L1, L2, L3 three phases, the monitor will Can recognize the phase sequence and work normally.
When the protected device is working normally, the yellow light is on, and when the relay does not pick up, it should be regarded as misconnection of the external line phase sequence, and the monitor has the function of preventing misconnection ;
2. When the L1, L2, and L3 phases are out of phase, the red light is on, the green light is off, and the relay is released; when the voltage is normal, the green light is on and the relay is closed;
3. L1, L2, L3 are connected to three-phase AC voltage, NO and COM are normally open contacts; NC and COM are normally closed contacts. Use wire to connect the terminal block directly.

ProductSiteLaunchDate : 2019-05-29T12:28:07.727Z
SpecificationMet : IEC/EN 60947
Style : Digital
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 5
UnspscCode : 27000000
Voltage : 250 volts
Wattage : 2 watts