Cart 2 india

Specification
Brand : LiebeWH
BulletPoint1 : LEVEL OUTPUT: When the 220V voltage is normal, photoelectric isolated module outputs a low level. When the 220V is powered off, it outputs a high level, output can be connected to PLC 24vb
BulletPoint2 : APPLICATION: Voltage detection board is used to detect whether AC 220V exists, can also use MCU for testing, and the working voltage is 3‑5V
BulletPoint3 : PLC CONNECTION: When connecting the PLC input, the COM terminal is connected to the 24V power supply, the input terminal is connected to the output S1‑S8 of the board, and the optocoupler GND is connected to the negative pole of the power supply
BulletPoint4 : MATERIAL: 8 channel optocoupler board adopts high quality PCB material, not easy to malfunction, very for long term use, small in size, light in weight
BulletPoint5 : EASY INSTALLATION: The optocoupler photoelectric isolator module blue 5.0 terminal is connected to the 220V voltage, and the yellow pin is the output, convenient to use and install
CurrentRating : 6 amps
FinishType : Finish
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
ItemName : Optocoupler Isolation Board 8 Channel PLC 24Vb Voltage Detection Module Level Conversion Board 220V AC for MCU Testing
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : voltage-monitoring-relays
Manufacturer : LiebeWH
Material : PCB
MaximumSwitchingCurrent : 6 amps
MaximumSwitchingVoltage : 24 volts
MeasurementSystem : Metric
NumberOfItems : 1
OperationMode : Automatic
PartNumber : LiebeWHchr8i6szwv2601
PowerSourceType : PowerSource
ProductDescription : Specification:
Item Type: Optocoupler Isolation Board
Material: PCB
Function: Test whether AC 220V exists. 
Output TTL Level: MCU can be used for testing, the voltage is 3-5V. 
Connection: Output can be connected to PLC 24Vb. 

Package List:
1 x Optocoupler Isolation Board

Note:
After the module is powered up, do not touch any part of the white wire frame on the board as it is high voltage. Pay attention to electrical safety.

ProductSiteLaunchDate : 2022-03-24T00:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 32130000