Cart 2 india

Specification
Brand : AEDIKO
BulletPoint1 : 2 Channel Relay Module Voltage : 12V; Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A
BulletPoint2 : 2 Channel Relay Module 12V Comes with High-Current Relay,Trigger Current : 5mA
BulletPoint3 : 12V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input
BulletPoint4 : Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
BulletPoint5 : 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers
ConnectorType : Through Hole
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 701715485013
ExternallyAssignedProductIdentifier2 : 0701715485013
IncludedComponents : module
InputVoltage : 5 volts_of_direct_current
ItemName : AEDIKO 4pcs DC 12V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger
ItemPackageDimensions_Height : 14.8082 centimeters
ItemPackageDimensions_Length : 2.6924 centimeters
ItemPackageDimensions_Width : 10.3124 centimeters
ItemShape : Square
ItemTypeKeyword : voltage-monitoring-relays
Manufacturer : AEDIKO
Material : lead
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Inch
MechanicalLifeExpectancy : 1000 days
ModelNumber : AE06233
MountingType : 通孔安装
NumberOfItems : 1
OperatingVoltage : 12 volts_of_direct_current
OperationMode : Off
PartNumber : AE06233
ProductDescription :

Relay Module Parameters:

Channel: 2 Channel

Working Voltage: DC 12V

Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A

Action Time (Under Rated Voltage): Less Than 10ms

Release Time (Under Rated Voltage): Less Than 5ms

Power Indicator (Green), Relay Status Indicator (Red)

Module Size : 50mm * 26mm * 18.5mm (L * W * H);2”x 1”x 0.7”

Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.

Input Interfaces:

DC +: Positive Power Supply DC 12V

DC-: Negative Power Connection

IN1: 1 Channel Signal to Trigger The End , You Can Set High or Low Level Control Relay

IN2: 2 Channel Signal to Trigger the End , You Can Set a High or Low Level Control Relay

Output Interfaces:

NO1: Relay Normally Open Interfaces , Relay Before Floating, Shorted Pull With COM1

COM1: Relay Common Interface

NC1: Normally Closed Port, COM1 Relay Shorted Before and After The Pull- Vacant

NO2:Normally Open Relay Interface, Relay Before Floating , Pull Back and COM2 Short

COM2: 2 Common Interface Relay

NC2: 2 - Way Normally Closed Relay Interface Relay Short Front and COM2 , Pull Vacant Post

High/Low Level Trigger:

1. Low Level Trigger When Jumper and L Short Circuit

2.

2.High Level Trigger When Jumper and H Short Circuit

Package Contents:

4x 2 Channel Relay Module with Optocoupler Isolation

ProductSiteLaunchDate : 2021-08-09T07:00:00.000Z
Size : 2 Channel - 12V
SpecificationMet : RoHS
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39122300
Wattage : 2