Cart 2 india

Specification
Brand : YUCHENGTECH
BulletPoint1 : 1.【Fine processing】▣ The wire bar wet film coater is made of high-quality stainless steel, the surface is polished, smooth, wear-resistant, anti-rust,and durable.
BulletPoint2 : 2.【Wire bar】▣ Adopt advanced extrusion technology, strong structure, not easy to break, uniform coating, high precision, easy cleaning and maintenance.
BulletPoint3 : 3.【Working principle】▣ Use steel wires of different diameters to wind around a certain length of stainless steel rod, and use the gap between the steel wires to prepare coating films of different thicknesses.
BulletPoint4 : 4.【Main parameters】▣ Coating thickness: 20 μm, Coating width: 200mm, Total length: 240mm.
BulletPoint5 : 5.【Application】▣ The wet film applicator is mainly used for coating the wet film with specified thickness to determine the covering power, color or sample preparation of samples.It is very suitable for coating ultra-thin coatings and soft materials.
ExternallyAssignedProductIdentifier : 8165077869652
ItemName : YUCHENGTECH Wire Bar Wet Film Applicator Coater Wire Bar Wet Film Coater Wire Rod Bar Applicator Wet Film Applicator (20μm)
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-viscometers
Manufacturer : YUCHENGTECH
Material : Aluminum
ModelNumber : 176
NumberOfItems : 1
PartNumber : YUCHENG TECH
ProductDescription : Product description:
1. For products such as paint, ink, varnish, glue and cosmetics, the reliability of the test is directly related to the quality of the samples provided.
2. For any test performed on this coating, the sample must be uniform, comparable, and precise in thickness control.
3. The film quality is mainly determined by the following three main factors: film viscosity, film speed and uniformity, surface smoothness.
4. Each applicator has a high precision fixed film thickness to ensure accuracy and film width.

Parameter:
Coating thickness: 20 μm
Coating width: 200 mm
Total length: 240mm
Weight: 0.5kg

Instructions:
1.Place the template on the platform, fix it, and do not move when the applicator slides over.
2.According to the required wet film thickness, select the applicator and place it on the short side of the sample plate, close to the parallel or specified position.
3.Then pour about 5ml of sample in front of the applicator, hold the handle with your hand, and slide at the speed of 150 mm / s, that is, coating the wet film with the required thickness.
4.After use, wash and wipe dry with solvent, and coat oil on the surface.

Note:
In order to get better test result, please operate on smooth surface when using.


ProductSiteLaunchDate : 2017-02-08T08:00:00.000Z
Size : 20μm
StreetDate : 2017-06-09T00:00:01Z
Style : Without Certificate
UnitCount : 8