Cart 2 india

Specification
Brand : Spaceman USA
BulletPoint1 : This is a genuine OEM (Original Equipment Manufacturer) part
BulletPoint2 : Made in China
BulletPoint3 : Use genuine OEM parts for safety reliability and performance
BulletPoint4 :
BulletPoint5 : Principle of structure: This instrument is a digital display viscometer, by motor through a variable speed drive constant speed rotation of the rotor. When the rotor rotates in the fluid, the fluid effect of viscosity on rotor torque. The greater the viscosity of liquid, the greater the viscous torque also; On the other hand, the liquid viscosity is smaller, the smaller the viscous torque also. The effect of viscous torque on the rotor by the sensors pick up, it is concluded that the viscosity
Color : Ø4mm
ExternallyAssignedProductIdentifier : 7904510904229
ExternallyAssignedProductIdentifier1 : 0779139325079
ExternallyAssignedProductIdentifier2 : 779139325079
IncludedComponents : Replacement Part
ItemName : Spaceman USA Viscosity Adjustment
ItemPackageDimensions_Height : 7 inches
ItemPackageDimensions_Length : 11 inches
ItemPackageDimensions_Width : 8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-viscometers
Manufacturer : Spaceman Usa
Material : Stainless Steel
ModelNumber : 920.1.03.0001
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 920.1.03.0001
ProductDescription : Technical Parameters:
Cup volume: 100ml
Hole diameter: Ø4mm
Cup body material: copper
Measuring range: 112～685 (cst)
End time: 25～150 (seconds)
Weight: 1.76Kg
Dimensions: 350×180×166mm (length×width×height)
Standard equipped with a shelf, a viscosity cup, a material Cup, a english manual

Technical Parameters

1. Purpose
This instrument is mainly used to determine the kinematic viscosity of Newton-type or similar Newton-type fluid coatings,
and can also be used for comparative measurement as required. The measurement of coating products with a viscosity of 30s~100s is a kind of portable viscometer, that is,
after the measured liquid is full, the time required to flow out of the hole to measure the viscosity of the liquid is in seconds.

3. Main technical features
3.1 The viscosity cup is made of brass. The volume is about 100 ml. Its geometric size and inner wall roughness meet the requirements of "GB/T1723 Paint Viscosity Determination Method".
The bottom is a stainless steel outflow hole. 3.2 The correction factor K value is that under the set temperature conditions (such as 20 degrees Celsius + 0.1 degrees Celsius) after filling the viscosity cup with the second standard oil,
the flow time should be in the range of 30s~100s, and the K value should be 1 + 0.03 range. The viscometer should be calibrated regularly according to the frequency of its use.


ProductSiteLaunchDate : 2020-07-13T12:41:51.708Z
Size : Large
StreetDate : 2021-09-18T00:00:01Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1