Cart 2 india

Specification
Brand : HMWOKPOT
BulletPoint : ParadoxLive Locta 1Nm8
BulletPoint1 : Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil.
BulletPoint2 : Aluminum cup body, stainless steel nozzle /outlet, stainless steel handle.
BulletPoint3 : Volume: 100mL; Outflow aperture: 4mm; Measuring range: 96-683cst; Outflow time: 20-110sec
BulletPoint4 : portable instrument, the coating viscosity conditions for the measurement. It can be used in conjunction with viscosity cup bracket (not include).
BulletPoint5 : Scope of application: widely used in paint industry viscosity measurement quickly and easily. Are designed for quick, approximate determination of efflux times for paints
ExternallyAssignedProductIdentifier : 7625030119428
ExternallyAssignedProductIdentifier1 : 0756804293598
ExternallyAssignedProductIdentifier2 : 756804293598
IncludedComponents : 1*Stormer host 1*paddle 1*Measuring cup 1*Instruction 1*Certificate
ItemName : HMWOKPOT 4Mm Immersion Viscosity Measuring Cup with Handle, Aluminum Paint Viscosity Cups for Determine Viscosity of Inks, Coatings, Paints
ItemPackageQuantity : 1
ItemShape : square
ItemTypeKeyword : science-lab-viscometers
Manufacturer : HMWOKPOT
ManufacturerMinimumAge : 180
Material : Copper
ModelNumber : VS-VE18-4P3712--1
NumberOfItems : 1
PartNumber : 65916001
ProductDescription : Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed and is widely used in electronic products, plastic coatings industry.

Parameter
Cup material: Aluminum
Capacity:100ml.
Cupinnerdiameter:50±0.05mm
Efflux Aperture Length :10±0.1mm
Nozzle hole diameter: Φ4 mm
Range of measurement：96-683 cSt
Efflux time (in seconds) :20-110 s

Usage:
1:Using a suitable solvent to wipe clean, when before or after the cup be used.
2:Put the cup into the container body 1—5 minutes, to achieve thermal equilibrium of the cup body, then put the cup body vertical lift from the feed-stock, the action should be fast and stable.
3:Timekeeping when the upper end of the cup leave from the surface of liquid, and liquid should be kept out of the cup vertically, with the surface distance of not more than 150mm.
4 :Stop timing when the first break-point occurs, and the difference between the two measured values should be less than 5% of the average.
ProductSiteLaunchDate : 2024-05-28T10:39:14.170Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1