Cart 2 india

Specification
AgeRangeDescription : adult
Brand : HFBTE
BulletPoint1 : Pore size (mm): Φ1.93mm Φ2.69mm Φ3.86mm Φ4.39mm Φ5.41mm
BulletPoint2 : Cup volume 44ml
BulletPoint3 : Cup 1#+2#+3#+4#+5# Dip Type 44ml For Pigment Coating Paint Finishes Oil lacquer Paint Ink Varnishes Syrup Etc
BulletPoint4 : Measurement range(cSt): 5-60cSt & 20-250cSt & 100-800cSt & 200-1200cSt & 400-1800cSt
BulletPoint5 : Flow time (sec): 20-80sec
Capacity : 44 milligrams
Color : Silver
ExternallyAssignedProductIdentifier : 8467694957447
IncludedComponents : 1#+2#+3#+4#+5# Zahn Cup
ItemName : HFBTE Viscosity Cup Set Zahn Cup Viscometer Flow Cup Stainless Steel Viscometer Flow Cup 1#+2#+3#+4#+5# Dip Type 44ml For Pigment Coating Paint Finishes Oil lacquer Paint Ink Varnishes Syrup Etc
ItemPackageDimensions_Height : 80 inches
ItemPackageDimensions_Length : 380 inches
ItemPackageDimensions_Width : 70 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-viscometers
Manufacturer : HFBTE
Material : Stainless Steel
ModelName : 2025022602dara
ModelNumber : 2025022602dara
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 2025022602dara
ProductDescription : HFBTE Viscosity Cup Zahn Cup Viscometer Flow Cup Stainless Steel Viscometer Flow Cup 1#+2#+3#+4#+5# Dip Type 44ml For Pigment Coating Paint Finishes Oil lacquer Paint Ink Varnishes Syrup Etc

Introduction：
♦Our Zahn Cup is according to the American society for materials laboratory,paint and raw material standard ASTM Numbers D4212-93 standard test method of immersion viscosity cup of relevant regulations,combined with the actual production.

Main Features
♦Suitable for Pigment Coating Paint Finishes Oil lacquer Paint Ink Varnishes Syrup Etc
♦Cup volume 44ml
♦Cup material: Stainless Steel

Technical Specifications:
♦Model:Zahn 1#+2#+3#+4#+5#
♦Pore size(mm):Φ1.93mm Φ2.69mm Φ3.86mm Φ4.39mm Φ5.41mm,Cup volume 44ml
♦Measurement range(cSt):5-60cSt 20-250cSt 100-800cSt 200-1200cSt 400-1800cSt
♦Flow time(sec):20-80sec
♦Cup material:Stainless Steel

Operation method:
1. Use a suitable solvent to wipe clean and dry the cup before use (Note: Please pay special attention to cleaning the small holes of the cup)
2.Choose the appropriate cup size so that the outflow time is controlled between 20 -80 seconds
3.Adjust the temperature of the filtered sample and the outflow cup to (23 degrees plus or minus 0.5 degrees) or another agreed temperature
4.Insert your fingers into the small ring on the handle, and quickly and steadily lift the cup body vertically from the sample to be tested
5.When the cup body is broken away from the liquid surface,it is important to keep the cup body vertical when the liquid flows out,and the distance from the liquid surface should not exceed 150mm.
6.Stop timing when the first breakpoint occurs,and the number of seconds of the outflow time is the viscosity value of the sample to be tested
7. Use a suitable solvent to clean it immediately, never use a metal brush to clean it
8. Dry after use and then save
ProductSiteLaunchDate : 2025-02-25T08:00:00.000Z
Size : Medium
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52151600