Specification Brand : Taidacent BulletPoint1 : Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor. BulletPoint2 : AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end. BulletPoint3 : corridor delay switch, delay energy-saving products; BulletPoint4 : Supply voltage: AC 220V power supply, Current: greater than 100mA BulletPoint5 : Load: 250V 30A AC or 30V 30A DC ItemName : Taidacent Vibration Sensor Delay Module AC 220V Power Supply Vibration Sensitivity Adjustable Vibration Detection Switch for Home Application ItemTypeKeyword : vibration-sensing-switches Manufacturer : Taida ModelNumber : ZC-DONGGE-VibrationSensorDelayModule NumberOfItems : 1 PartNumber : ZC-DONGGE-VibrationSensorDelayModule ProductDescription : Description: The module detects that the vibration relay is on, there is no vibration, the delay is off, there is always a vibration trigger signal during the delay time, the relay is always on, the relay will not be disconnected and flashed, and the vibration trigger signal stops, start from the new Timing, the delay time is up when the relay is disconnected; the green light is on, that is, the common end is connected to the normally open end. Use: The vibration triggers the alarm delay, which can be directly used in car alarms, vibration switches, and various high current and high voltage applications. Module Features: 1. One high sensitivity vibration sensor with a line length of 1 meter; 2. The vibration sensor can be connected to the detection position. The line length has no effect on the sensitivity within 5 meters 3. When the vibration sensor vibrates, the module starts timing, lights up the green LED, the relay is closed, the timing ends, the green LED is off, the relay is released, and the relay is restored to the normally closed end; 4. The module detects that there is a vibration relay connected. There is no vibration and the delay is disconnected. There is always a vibration trigger signal during the delay time. The relay is always on, the relay will not be disconnected and flashed, and the vibration trigger signal stops. Start timing from the new time, the delay time is up to the relay disconnected; 5, with timing potentiometer adjustment time, product design is adjustable from 1 to 180 seconds, can also be customized time range; 6, the timing time error is 5% 7, the output can be connected to AC 250V 30A or DC 30V 30A load; Application: 1, connected to the vibration sensor can do a variety of alarm delay trigger, such as earthquake alarm, burglar alarm, car burglar alarm 2, the shock sensor can also be applied to the car start automatic trigger control related products;
ProductSiteLaunchDate : 2019-06-28T07:00:00.000Z Voltage : 220 volts