Cart 2 india

Specification
Brand : IPUDIS
BulletPoint1 : quality and easy to install.
BulletPoint10 : The vibration sensor has been widely used in electric alarms in recent years because it simplifies the complicated structure of buzzer and magnet plus spring used in conventional alarm.
BulletPoint2 : Light weight,stiffness and good-looking.
BulletPoint3 : Widely used for vehicle DIY.
BulletPoint4 : Stylish and exquisite appearance.
BulletPoint5 : Widely Used:For use in a variety of applications including cars,boats,motorcycles,electronics
BulletPoint6 : Model number: SW-420; Max voltage: 12V; Rated thermal current: 20mA
BulletPoint7 : Insulation resistance: 10M ohms; Maximum temperature resistance: 80℃
BulletPoint8 : SW-420 is a single roller type omnidirectional induction trigger switch. This product can detect vibrations and tilts in different directions.
BulletPoint9 : This product is fully sealed and can be waterproof and dustproof. Suitable for activation by induction of vibrations and inclination of small current circuits.
Color : One Color
ConnectivityProtocol : X-10
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 9050633170664
ItemName : IPUDIS Electronic Vibration Sensor SW-420 Vibration Switch 12V 10mA Curved Pin 30pcs
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-vibration-sensors
Manufacturer : IPUDIS
Material : Copper
ModelName : IPUDIS
ModelNumber : IPUDIS
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 12 volts
PartNumber : IPUDIS
ProductDescription : IPUDISDescription: 1.SW-420 is a single roller type omnidirectional induction trigger switch. This product can detect vibration and tilt in different directions. 2. This product is fully sealed and can be waterproof and dustproof. Suitable for vibration and tilt induction activation of small current circuits. 3. When there is no vibration and tilt, the product is in the ON/OFF closed state and in the stable state. When there is vibration or tilt, the conductive resistance increases or decreases and a current pulse signal is generated, which activates the circuit. 4. The vibration sensor is a vibration detection element developed for alarms. Because it simplifies the complicated structure of buzzer and magnet plus spring used in traditional alarms, it has been widely used in electric alarms in recent years. Working principle: Normally, the switch of angle is on. When vibrated or moved, the current-carrying roller in the switch will move or vibrate, causing the passing current to be turned off or the resistance value increased to activate the circuit. The characteristic of this type of switch is that it is normally on, and it will be off briefly when it is vibrating, so it has high sensitivity. Through the IC setting, the customer can adjust according to the requirement of product sensitivity. Specification: Product Name: Vibration Switch Model Number: SW-420 Max. Voltage: 12 V Rated thermal current: 20 mA Insulation resistance: 10 M ohm Max. Pin Size: 14mm x 0.6mm Body Dimension: 10mm x 5.5mm Package Content: 30 x Vibration Switches
ProductSiteLaunchDate : 2024-04-20T04:42:17.184Z
Size : One Size
SwitchType : Temperature Switch
UnitCount : 1