Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Model:180J6; Effective Length: 18" (457mm); Width: 0.55" (14mm); Thickness: 0.14" (3.5mm); Belt Angle: 40 degrees.
BulletPoint2 : Made of nitrile butadiene rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
BulletPoint3 : The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
BulletPoint4 : Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, lawnmowers, drills, and saws.
BulletPoint5 : Notice: Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys, and shaft too great.
Color : Black
CompatibleDevices : 3D Printer
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7316572621691
IncludedComponents : 5pcs sanding belts
ItemName : uxcell 180J6 Rubber Poly V Belts, 6 Ribs PJ V-Ribbed Belt 18" Length x 0.55" Width x 0.14" Thick, Industrial Transmission Drive Belt, 3pcs
ItemPackageDimensions_Height : 27.3 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : uxcell
Material : Rubber
ModelNumber : PHC C2120X10FT
NumberOfItems : 1
PartNumber : a23091100ux1249
ProductDescription : DescriptionsV-belts are the most common type of drive belt used for power transmission. The V-shaped ribs increase the contact area between the belt and pulleys, they provide the best combination of traction, speed transfer, load distribution, and extended service life.
The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
Made of nitrile butadiene rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, drills, and saws.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2023-10-13T03:46:44.078Z
Size : 18" Length
Style : Conveyor chain
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3
UnspscCode : 26111800
Voltage : 490 volts